PK-2024A-XXX-PTXX-X 2.00mm Pitch Housing Packing
■Step 1: Place the inspected product,arrange neatly and in the same direction into the uptake plastic tray,the quantity cannot be reduced.
■步骤1：将检验好的良品，整齐并方向一致地摆放入吸塑盘，不可少数。
■Specification of the uptake plastic tray: 2024SP-3300*3300*143
■吸塑盘规格：2024SP-3300*3300*143
■Step 2: Overlap the uptake plastic tray,When it overlaps,adjacent upper and lower tray need to be rotated 180 degrees for stacking.one empty uptake plastic tray is stacked together in every 25 products,and put one on the top layer as well,fold them up into a bundle,then cross and parallel wrap with PE film.
■步骤2：将吸塑盘重叠，在重叠吸塑盘时，相邻上下两盘得要旋转180度堆叠，每25盘产品加最顶层放1PCS空吸塑盘叠起来为1扎。然后用PE膜井字型缠绕。
■Step 3: One bundle per carton, put it flat into the carton,then seal the carton with transparent tape,attach outer carton label.
■步骤3：每1扎为一箱，平整地放入外箱内，然后用透明胶带封箱。贴上外箱标签。
■Note: when the carton is not full,filling material is required,cannot shake too much.
■注：不满箱时，需使用填充物，不可晃动太大。
■Carton size: CB-350*350*260KK
■纸箱规格：CB-350*350*260KK
■Carton material: K=K; Carton thickness: 6~7mm
■纸箱材质：K=K；纸箱厚度：6~7mm
|
PK-2024A-XXX-PTXX-X 、 2024A-XXA-PTXX-X 、 2024A-XXB-PTXX-X 、 2024WRS-XXX-PPSW1XR 、 2024WRS-XXA-PPSW1XR 、 2024WRS-XXAN2-PPSW1XR 、 2024WRS-XXB-PPSW1XR |
|
|
|
|
|
Package Information |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
20240618 |
|
|
版次 A0 |
|
|
|
|
|
1.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
