J Series High Voltage Power Supply
■The J Series high voltage power supplies are regulated high voltage power supplies. They provide outputs of up 10kV and power levels to 3 Watts. The output of each power supply is floating with respect to the input line. This allows either polarity to be configured. The output voltage of the J may be varied either with the unit trimpot, an external trimpot, or via an external control signal. The output ripple is typically less than 1% at full power. Each power supply may be programmed down to 0% of the maximum output voltage. All J models offer 0.01% line regulation and 3% maximum half load to full load regulation. All J’s are reverse input voltage and short circuit protected.
●Features
■Regulated Output
■Encapsulated
■100 VDC to 10,000 VDC models available
■3 Watt power
■15 VDC input or 24 VDC input models
■Trimpot, Resistance or Voltage program
|
J Series 、 J – 1/15 、 J – 2/15 、 J – 6/15 、 J – 12/15 、 J – 25/15 、 J – 50/15 、 J – 100/15 、 J – 1/24 、 J – 2/24 、 J – 6/24 、 J – 12/24 、 J – 25/24 、 J – 50/24 、 J – 100/24 、 J – XX / Y |
|
|
High Voltage Power Supply 、 regulated high voltage power supplies |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2010/11/23 |
|
|
|
|
|
|
|
|
162 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
