ECON-SD10MS 半自动离线式锡渣分离机 (ECON-SD10MS Automatic Solder Dross Separation Machine)
■基本功能与特点
▲本机采用特殊搅拌分离机构, 锡渣自动输入进入搅拌区焊锡内部；
▲锡灰自动分离出来, 并排出至锡灰收集箱内；
▲分离后的焊锡自动进入焊锡贮存箱内, 到一定液位后自动报警, 人工打开放锡咀, 排放至接锡盘内成形；
▲本分离装置无需人工清理高温滤桶内的锡灰, 解决了高温危险性；
▲分离率非常稳定,分离后的锡灰呈面粉状, 目视基本无明显锡粒；
▲完全符合节能、安全、环保要求；
▲日处理量：120KG-150/8H；
▲隔热防护网，避免操作员烫伤，机壳表面温度控制在45 度以内.
■Features
▲Uses special mixing & seperation design, the dross automatically feeded into inner part of mixing part.
▲Automatic separation of tin and tin ash, into the tin and tin matic tin-ash collection device.
▲Separated liquid pure tin automatically stored in the tin cabin, when it is reaches a certain volum, the alarm system turns on. operator just only need discharge the liquid pure tin into molding tray.
▲This machine is no need to clean high temperature filtering cabin to avoid any human damange.
▲Stability of high separation
rate, powder type ash afterater separation hardly see any solder by visual.
▲Suit for energy saving, safty and Econ-friendly requirement.
▲Ability: 120KG-150KG/8H
▲Heat insulation prevention mesh controls the machine outside temperature within 45℃, which is avoid operator to be hurt.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2016/10/25 |
|
|
|
|
|
|
|
|
337 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
