RP107x SERIES OUTPUT CAPACITOR-LESS/LOW VOLTAGE 200mA LDO REGULATOR
2024-08-14
●OUTLINE
■The RP107x Series are CMOS-based LDO regulators featuring 200mA output.
■Since the output capacitor and noise bypass capacitor are able to be reduced and the packages are small DFN(PL)1212-6, WLCSP-4-P5, and SC-88A, high density mounting on boards are possible. The input voltage (VIN) is as low as Min.1.4V and the output voltage can be set from 1.0V.
■Supply current is as low as 9.5μA compared to existing lines. The CE pin can switch the regulator to standby mode.
●FEATURES
■Supply Current: Typ. 9.5μA
■Standby Mode: Typ. 0.1μA
■Dropout Voltage: Typ. 0.27V (IOUT=200mA, VOUT=3.0V)
■Ripple Rejection:
▲Typ. 70dB (f=1kHz, VOUT≤1.2V)
▲Typ. 65dB (f=1kHz, 1.2V▲Typ. 60dB (f=1kHz, VOUT≥2.2V)
■Temperature-Drift Coefficient of Output Voltage: Typ. ±100ppm/℃
■Line Regulation: Typ. 0.02%/V
■Output Voltage Accuracy: ±1.0%
■Packages: WLCSP-4-P5, DFN(PL)1212-6, SC-88A, SOT-23-5
■Input Voltage Range: 1.4V to 5.25V
■Output Voltage Range: 1.0V to 4.2V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.)
■Built-in Fold Back Protection Circuit: Typ. 50mA (Current at short mode)
■Output capacitor free and noise bypass capacitor free
■The RP107x Series are CMOS-based LDO regulators featuring 200mA output.
■Since the output capacitor and noise bypass capacitor are able to be reduced and the packages are small DFN(PL)1212-6, WLCSP-4-P5, and SC-88A, high density mounting on boards are possible. The input voltage (VIN) is as low as Min.1.4V and the output voltage can be set from 1.0V.
■Supply current is as low as 9.5μA compared to existing lines. The CE pin can switch the regulator to standby mode.
●FEATURES
■Supply Current: Typ. 9.5μA
■Standby Mode: Typ. 0.1μA
■Dropout Voltage: Typ. 0.27V (IOUT=200mA, VOUT=3.0V)
■Ripple Rejection:
▲Typ. 70dB (f=1kHz, VOUT≤1.2V)
▲Typ. 65dB (f=1kHz, 1.2V
■Temperature-Drift Coefficient of Output Voltage: Typ. ±100ppm/℃
■Line Regulation: Typ. 0.02%/V
■Output Voltage Accuracy: ±1.0%
■Packages: WLCSP-4-P5, DFN(PL)1212-6, SC-88A, SOT-23-5
■Input Voltage Range: 1.4V to 5.25V
■Output Voltage Range: 1.0V to 4.2V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.)
■Built-in Fold Back Protection Circuit: Typ. 50mA (Current at short mode)
■Output capacitor free and noise bypass capacitor free
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.