PYROGALLOL / REAGENT ACS CRYSTAL SPECIFICATION SHEET
▲General Description
●The Broadcom ® BCM957504-N1100G is a single-port 100 Gb/s PCI Express 4.0 x16 network adapter designed to the Open Compute Project (OCP) 3.0 Design Specification in small form factor with one QSFP56 network connector. The adapter supports QSFP56/QSFP28/QSFP+ optical modules and copper direct-attach cables. The network adapter uses the Broadcom BCM57504 100GbE MAC controller with an integrated single-channel 100GbE SFI transceiver.
▲Features
●Single-port pluggable media interface, which is compatible with a QSFP56/QSFP28/QSFP+ optical transceiver or a copper direct-attach cable.
●Industry’s most secure PCIe adapter solution leveraging Broadcom’s BroadSAFE® technology
●Supports Ethernet 50G PAM-4 and 25G/10G NRZ signaling.
●Multi-Host up to four hosts.
●Fully compliant with the SFF-8402 standard.
●x16 PCI Express 4.0 compliant.
●SR-IOV with up to 1k virtual functions (VFs).
●Function-Level Reset (FLR) support.
●TruFlow ™ flow processing engine.
●Virtual Network Termination – VXLAN, NVGRE, Geneve, GRE encap/decap.
●vSwitch Acceleration.
●Tunnel-aware stateless offloads.
●DCB support – PFC, ETS, QCN, DCBx.
●RDMA over Converged Ethernet (RoCE)
●Network Controller Sideband Interface (NC-SI).
●SMBus 2.0.
●MCTP over SMBus.
●Jumbo frames up to 9 KB.
●Advanced congestion avoidance.
●Multiqueue, NetQueue, and VMQ.
●IPv4 and IPv6 offloads.
●TCP, UDP, and IP checksum offloads.
●Large send offload (LSO).
●Large receive offload (LRO).
●TCP segmentation offload (TSO).
●Receive-side scaling (RSS).
●Transmit-side scaling (TSS).
●VLAN insertion/removal.
●Interrupt coalescing.
●Network boot—PXE, UEFI.
●iSCSI boot.
●Wake-on-LAN (WOL).
●MSI and MSI-X.
●OCP 3.0 FRU support.
●Conforms to the OCP 3.0 Design Specification Version 1.00.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
06/16/2014 |
|
|
|
|
|
289 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.