SGM25701 Positive High-Voltage Hot Swap and Inrush Current Controller with Power-Limiting

2024-07-15
●GENERAL DESCRIPTION
■ The SGM25701 is a positive hot swap controller that allows a board to be safely inserted or removed from a live backplane. Inrush current control function can effectively reduce the voltage drop on the power supply rail.
■The SGM25701 offers programmable power-limiting and current limit to ensure that the external MOSFET operates within its safe operating area (SOA) at all times.
■The chip has a good output indication function when the VOUT increases to within the 1.4V range of the VIN .
■Programmable under-voltage lockout or over-voltage lockout is used to turn off the device if the VIN drops below or raises over a threshold value. The fault detection time and initial insertion delay time can also be adjusted by the user.
■The SGM25701B will latch off when a fault is detected, while the SGM25701A will go into auto-retry mode.
■SGM25701 is available in a Green MSOP-10 package.
●FEATURES
■ Wide Input Voltage Range: 9V to 70V
■ Inrush Current Limit, PCB can be Safely Inserted into Live Equipment
■ External Device Programming Maximum Loss Limit
■ Programmable Current Limit
■ Adjustable Under-Voltage Lockout (EN/UVLO)
■ Adjustable Over-Voltage Lockout (OVLO)
■ Open-Drain for Good Output Indication
■ Quick Cut-Off Function when Severe Over-Current Occurs
■ Configure Charge Pump/Gate Driver for External N-MOSFET
■ The Setting of the Insertion Time Allowing the Ringing and Transient Recovery Process after the System Connected
■ Adjustable Fault Timing to Prevent False Shutdown
■ Behavior after Fault:
◆ SGM25701A: Auto-Retry
◆ SGM25701B: Latch-Off
■ Available in a Green MSOP-10 Package

SGMICRO

SGM25701SGM25701ASGM25701BSGM25701AXMS10G/TRSGM25701BXMS10G/TR

More

Part#

Positive High-Voltage Hot Swap and Inrush Current Controllerpositive hot swap controller

More

24V Industrial System ]48V Industrial System ]Server Backplane System ]Solid State Circuit Breaker ]Base Station ]

More

Datasheet

More

More

Please see the document for details

More

More

MSOP-10

English Chinese Chinese and English Japanese

MAY 2024

REV.A.2

2.3 MB

- The full preview is over. If you want to read the whole 25 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: