Drymix Mortar Yearbook 2019
■Self-filling concrete compounds - SFCCs - are a kind of 2-component systems, consisting of coarse aggregates and special drymix mortar composi-tions. Those customized drymix mortars are formu-lated with additives and specific, flowable dispers-ible polymer powders to obtain the required performance - mainly compressive strength, setting time, flow behavior and abrasion resistance.
■In the application of SFCC the desired particulate material: Aggregates, such as gravel or grit (component 1) and the drymix mortar (component 2) ‒ are present separately. On the construction site,the grit is first spread on or into the prepared casting mold, the drymix mortar is mixed with water and then pumped over the grit layer. The highly flowable mass quickly fills the air voids between the grit particles, which constitute about 50% of the volume, and binds them to form a solid concrete structure. Instead of fully filling, it’s also possible to generate a porous agglomeration while spraying the SFCC onto the aggregate and generate single particle bonding, to get a pervious structure.Depending on the formulation, the system sets very quickly, in even less than an hour, if so desired.The flow characteristics, or the rheology, of the SFCC are particularly important. The SFCC has to contain a flowable dispersible polymer powder that promotes flow and stabilizes the very liquid mixture in order to prevent segregation or separation during the mold filling process.
■In contrast to conventional concrete, SFCC is almost free of shrinkage, as particles are already fully in direct contact with each other. The shrinkage in regular concrete is usually up to two percent. The filled voids in the SFCC application experiment are at most one centimeter long and shrinkage is corre-spondingly small - tension or cracks therefore cannot occur in the casted element easily.
|
Drymix Mortar 、 Dry-Mix Concrete 、 Self-filling concrete compounds 、 SFCCs |
|
|
[ landscape architecture ][ roads ][ paths ][ waterways ][ construction site ] |
|
|
Technical Documentation |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
18. March 2019 |
|
|
|
|
|
ISBN 978-3-9816240-8-3 |
|
|
386 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
