PL51WT003 ADC/Touch Key Low Power High Performance 2.4GHz RF SOC
■PL51WT003 is a ADC/Touch Key low power high performance 2.4GHz wireless system-on-chip (SOC) with operation in the world wide ISM frequency band at 2.400~2.4835GHz.
■PL51WT003 combines 2.4GHz RF transceiver with a single-cycle enhanced 8051 compliant CPU, 16KB in-system programmable flash memory, 256B EEPROM data memory, 256B IRAM, 1KB XRAM, up to 15 General-Purpose I/O pins, program and data area read control permission, and program area code encryption scrambling storage, high security level to protect user program and data.
■This single chip wireless transceiver integrated including: RF synthesizer, Power Amplifier, Crystal Oscillator, Modem and etc.
■Output power, channel selection and protocol can be flexible configured through SPI interface.
■With built in FHSS and accurate digital RSSI, this transceiver achieves a good capability of anti-interference, so that, it can work under every complicated environment with high performance.
■Built in address and FEC, CRC function;
■Built in Auto-ACK & Auto-Resend function.
■The output power of the chip can be set up to 5.5dBm and the receive sensitivity can achieve -88dBm.
■Built in Crystal Oscillator resistor (680K), capacitances (2*15pF).
■Built in 10K pull-down resistor for ANT and ANTB antenna.
■PL51WT003 support UART, I2C and SPI interfaces.
PL51WT003 、 PL51WT003B24 、 PL51WT003T20 、 PL51WT003S16 、 PL51WT003S16R |
|
ADC/Touch Key Low Power High Performance 2.4GHz RF SOC 、 ADC/Touch Key low power high performance 2.4GHz wireless system-on-chip 、 ADC/Touch Key low power high performance 2.4GHz wireless SOC |
|
[ Proprietary 2.4GHz Systems ][ Wireless Mice ][ Keyboards ][ Game Controllers ][ RF Remote Controller ][ Home Automation ][ Commercial Automation ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SSOP24;TSSOP20;SOP16 |
|
English Chinese Chinese and English Japanese |
|
2022/07/22 |
|
Rev. 0.6 |
|
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.