XC6219/6211 Series High Speed LDO Regulators, Low ESR Cap. Compatible, ON/OFF Switch
2024-06-07
●GENERAL DESCRIPTION
■The XC6219/XC6211 series are highly accurate, low noise, CMOS LDO Voltage Regulators. Offering low output noise, high ripple rejection ratio, low dropout and very fast turn-on times, the XC6219/6211 series is ideal for today’s cutting edge mobile phone. Internally the XC6219/6211 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators. The XC6219/6211’s current limiters' foldback circuit also operates as a short protect for the output current limiter and. the output pin. The output voltage is set by laser trimming. Voltages are selectable in 50mV steps within a range of 0.9V to 5.0V. The XC6219/6211 series is also fully compatible with low ESR ceramic capacitors, reducing cost and improving output stability. This high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequencies.
■The CE function allows the output of regulator to be turned off, resulting in greatly reduced power consumption.
●FEATURES
■Maximum Output Current:
▲150mA (VOUT<1.75V, A~D type)
▲240mA (VOUT≧1.8V, A~D type)
▲300mA (VOUT≧1.3V, E~H type)
■Dropout Voltage: 200mV @ IOUT=100mA
■Operating Voltage Range: 2.0V ~ 6.0V
■Output Voltage Range: 0.9V ~ 5.0V (50mV steps)
■Highly Accuracy:
▲±2% (VOUT>1.5V)
▲±30mV (VOUT≦1.5V)
▲±1% (VOUT≧3.0V)
■Low Power Consumption: 25μA (TYP.)
■Standby Current: Less than 0.1μA (TYP.)
■High Ripple Rejection: 65dB @10kHz
■Operating Temperature Range Low ESR Capacitor: Ceramic capacitor compatible
■Ultra Small Packages:
▲SOT-25 (SOT-23-5)
▲SOT-89-5 (for XC6219 only)
▲USP-6B (for XC6219 only)
■The XC6219/XC6211 series are highly accurate, low noise, CMOS LDO Voltage Regulators. Offering low output noise, high ripple rejection ratio, low dropout and very fast turn-on times, the XC6219/6211 series is ideal for today’s cutting edge mobile phone. Internally the XC6219/6211 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators. The XC6219/6211’s current limiters' foldback circuit also operates as a short protect for the output current limiter and. the output pin. The output voltage is set by laser trimming. Voltages are selectable in 50mV steps within a range of 0.9V to 5.0V. The XC6219/6211 series is also fully compatible with low ESR ceramic capacitors, reducing cost and improving output stability. This high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequencies.
■The CE function allows the output of regulator to be turned off, resulting in greatly reduced power consumption.
●FEATURES
■Maximum Output Current:
▲150mA (VOUT<1.75V, A~D type)
▲240mA (VOUT≧1.8V, A~D type)
▲300mA (VOUT≧1.3V, E~H type)
■Dropout Voltage: 200mV @ IOUT=100mA
■Operating Voltage Range: 2.0V ~ 6.0V
■Output Voltage Range: 0.9V ~ 5.0V (50mV steps)
■Highly Accuracy:
▲±2% (VOUT>1.5V)
▲±30mV (VOUT≦1.5V)
▲±1% (VOUT≧3.0V)
■Low Power Consumption: 25μA (TYP.)
■Standby Current: Less than 0.1μA (TYP.)
■High Ripple Rejection: 65dB @10kHz
■Operating Temperature Range Low ESR Capacitor: Ceramic capacitor compatible
■Ultra Small Packages:
▲SOT-25 (SOT-23-5)
▲SOT-89-5 (for XC6219 only)
▲USP-6B (for XC6219 only)
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
