XB-KS-03 XB PUSH SWITCH
■General:
▲Operating temperature: -25℃~65℃.
▲Ambient humidity: 80%RH max.
▲Test conditions:
◆Temperature: (20±2℃)
◆Relative humidity: (65±5%)
◆Pressure: (860~1060 m bars)
▲Type of actuation: Momentary.
▲Contact arrangement: S.P.S.T.
▲Maximum ratings: 10mA 12V DC.
▲Dimension: Shall confirm to the assembly drawings.
■Electrical:
▲Contact resistance: 1Ω max.(initial)
▲Insulation resistance: 50MΩ min(at DC 250V)
▲Dielectric withstanding voltage: AC 110V(50Hz or 60Hz) shall be applied across terminals and terminals and metal frame for one minute.
▲Bounce: 5m sec.max.
▲Switching positions:
◆Total off range: 1.0 mm min.
◆Total on range: 1.0 mm min.
■Mechanical:
▲Operating force: 130±30gf.
▲Total travel: 4.0±0.5mm.
▲Stem strength: 5.0kgf.
▲Pretravel: 1.5±0.5mm.
■Endurance:
▲Operating life: 1,000,000 cycles min.
▲Soldering temperature: 255℃ max.
▲Duration of solder immersion: 5 sec.max.
■Model: With click.
■Weight: About 1.8g.
■Notice:
▲Following the soldering process, do not try to clean the switch with a solvent or the like.
▲Safeguard the switch assembly against flux and dust penetration from its top side.
▲Please pay special attention at the time of soldering not to give an extra force on terminals as to cause any deforming of them and resulting in bad effects on the electrical properties.
▲Please use manual soldering.
|
|
|
|
Product Drawing |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2024/05/07 |
|
|
VERSION:01 |
|
|
|
|
|
718 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
