BW16-Kit specification
■BW16-Kit is a development board designed for the BW16 module. BW16 is a dual-frequency Wi-Fi + Bluetooth SoC module developed by B&T based on RTL8720DN chip. BW16 supports dual-frequency (2.4GHz or 5GHz) WLAN and low-power Bluetooth 5.0, integrates ARM V8 (compatible with Cortex-M4F) high-performance MCU, ARM V8M (compatible with Cortex-M0) low-power MCU, WLAN (802.11a/b/g/n), MAC, Bluetooth baseband and RF baseband, and provides a set of configurable GPIO ports for the control of different peripheral devices.
●Characteristic
■Supports 802.11a/B/g/n,2.4GHz or 5GHz.
■Support HT20 and HT40 mode.
■Supports low-power Beacon listening mode, low-power receiver mode, and low-power suspension mode.
■Built-in AES / DES / SHA hardware engine.
■Supports TrustZone-M and secure startup.
■Support SWD to debug port access protection and disable mode.
■BLE 5.0 is supported.
■Bluetooth supports high power mode (7dBm, sharing the same PA with Wi-Fi).
■Wi-Fi and Bluetooth share the same antenna.
■Supports the STA/AP/STA + AP operation mode.
■Simple Config (apps) that support Android and IOS Wi-Fi one-click Network allocation.
■Supports Bluetooth-assisted network distribution.
■Supports local serial port upgrades and remote firmware upgrades (FOTA).
■Supports secondary development and programming in Linux and Window environments.
■Supports Arduino development.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DIP-22;SMD-16 |
|
English Chinese Chinese and English Japanese |
|
2024.03.25 |
|
V1.2.3 |
|
|
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.