APM32A103CBT7 Arm® Cortex®-M3 based 32-bit MCU Datasheet
■Core
▲32-bit Arm® Cortex®-M3 core
▲Up to 96MHz working frequency
■On-chip memory
▲Flash:128KB
▲SRAM:20KB
■Clock
▲HSECLK: 4~16MHz external crystal/ceramic oscillator supported
▲LSECLK: 32.768KHz crystal/ceramic oscillator supported
▲HSICLK: 8MHz RC oscillator calibrated by factory
▲LSICLK: 40KHz RC oscillator supported
▲PLL: Phase locked loop, 2~16 times of frequency supported
■Reset and power management
▲VDD range: 2.0~3.6V
▲VDDA range: 2.0~3.6V
▲VBAT range of backup domain power supply: 1.8V~3.6V
▲Power-on/power-down reset (POR/PDR) supported
▲Programmable power supply voltage detector supported(PVD)
■Low-power mode
▲Sleep, stop and standby modes supported
■DMA
▲One 7-channel DMA
■Debugging interface
▲JTAG
▲SWD
■I/O
▲Up to 37 I/Os
▲All I/Os can be mapped to external interrup vector
▲Up to 21 FT input I/Os
■Communication peripherals
▲2 I2C interfaces (1Mbit/s), all of which support SMBus/PMBus
▲3 USART, support ISO7816, LIN and IrDA functions
▲2 SPI (18Mbps) interfaces
▲1 CAN
▲1 USBD
■Analog peripherals
▲2 12-bit ADCs
■Timer
▲1 16-bit advanced timers TMR1 that can provide 7-channel PWM output, support dead time generation and braking input functions
▲3 16-bit general-purpose timers TMR2/3/4, each with up to 4 independent channels to support input capture, output comparison, PWM, pulse count and other functions
▲2 watchdog timers: one independent watchdog IWDT and one window watchdog WWDT
▲1 24-bit autodecrement SysTick Timer
■RTC
▲Support calendar and clock functions
■84Bytes backup register
■CRC computing unit
■FPU
▲Independent FPU module supports floating point operations
■96-bit unique device ID
APM32A103CBT7 、 APM32A103 、 APM32A103CBT7 Series 、 APM32A103CBT7XXX 、 APM32A103CBT7-R |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LQFP48;LQFP |
|
English Chinese Chinese and English Japanese |
|
2022.12 |
|
V1.0 |
|
|
|
4.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.