KTZ8868 High Efficiency 8-CH LED Backlight Driver with Dual LCD Bias Power EVAL Kit Quick Start Guide
■Required Equipment
▲Bench Power Supply for VIN 5V and 3A, as needed for the intended application.
▲ Digital Multimeter – one or more, used to measure input/output voltages and currents.
●Quick Start Procedures
■Configure Kinetic I2C adapter output voltage jumper to 3.3V.
■Connect 5 Kinetic I2C adapter wires to evaluation board connector P1 (VDD_IO, HWEN, SDA, SCL, GND).
■Connect the other end of I2C adapter module to USB port on the computer.
■Connect one pair of banana-to-clip power cables to EVB test points at VIN and GND.
■Before connecting EVB to VIN bench supply, turn on supply and adjust voltage as close to 0V as possible. Turn off supply. While off, connect banana ends of Banana-to-clip power cables to VIN bench supply.
■Turn on VIN bench supply and ramp its voltage to 3.6V. While ramping VIN slowly, use bench supply’s output current indication to monitor the VIN current. If the current becomes high, reduce VIN voltage quickly to prevent damage. Inspect the setup for any wiring errors. Once VIN voltage settles to 3.6V, supply current should only be around a few μA since the KTZ8868 and KTC2115 devices are in shutdown mode.
|
|
Evaluation Board User's Manual |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
February 2024 |
|
|
|
QSG-0024-01 |
|
178 KB |
- +1 Like
- Add to Favorites
Recommend
- Kinetic Technologies Announces KTZ8868 New 80-LED Backlight Driver and LCD Bias Power for up to 12” Display Panels
- Kinetic Technologies Announces Industry’s First Qi v1.3 Certified Wireless Power Receiver KTE7000
- Kinetic Technologies’ Latest Overvoltage Protection Device KTS1676 Offers Device Protection from Surges of up to ±100V
- Eliminate the Need for TVS Diodes and Gain ESD, Surge and Overvoltage Protection for USB Type-C Ports with Kinetic Technologies‘ KTU1108
- Kinetic Technologies‘ Advanced Video Protocol Converter MCDP5200 Elevates Productivity and Gaming Experiences to New Heights
- Kinetic Technologies Introduced Highly Optimized, Ultra-Low Power MST Hub KTM5000 with DSC Support
- USB Type-C Data Line Overvoltage Protection IC KTU1001 from Kinetic Technologies Saves Power and Delivers Fastest Fault Response Time
- Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.