TPT480 TPT482 3.3V & 5.0V Full Duplex RS-485 Transceivers

2024-03-01
●Description
■The TPT480 and TPT482 is IEC61000 ESD protected, which support ±12 kV IEC contact and ±15 kV IEC air discharge. 3.0V ~ 5.5V transceivers that meet the RS-485 and RS-422 standards for Full Duplex communication.
■Transmitters in this family deliver exceptional differential output voltages into the RS-485 required 54Ω load. The devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters.
■Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus.
■The TPT480x is designed for full-duplex RS485, and support SOP8, DFN3X3-8, MSOP10 and SOP14 package, which is characterized from –40℃ to 125℃.
●Features
■Exceeds Requirements of Full Duplex EIA-485 Standard
■Hot Plug Circuitry -Tx and Rx Outputs Remain Three-State During Power-up/Power-down
■Supply voltage: 3.0V ~ 5.5V
■Input Common-mode Range: -7V ~ +12 V
■Data Rate: 32Mbps
■Up to 256 Nodes on a Bus (1/8 unit load)
■Full Fail-safe Receiver (Open, Short, Terminated)
■Bus-Pin Protection:
▲20 kV HBM ESD
▲12 kV IEC61000-4-2 Contact Discharge
▲15 kV IEC61000-4-2 Air Discharge
■–40℃ to 125℃ Operation Temperature Range

3PEAK

TPT480TPT482TPT480xTPT480L1-SO1RTPT480-DF6RTPT482-SO2RTPT482-VS2R

More

Part#

Full Duplex RS-485 TransceiverstransceiversFull Duplex RS 485/RS 422 transceivers

More

Home Appliance ]Motor Drives ]Industrial Control ]Grid Infrastructure ]Video Surveillance ]Communication Infrastructure ]

More

Datasheet

More

More

Please see the document for details

More

More

SOP8;DFN3X3-8;MSOP10;SOP14;SOP-8;SOP-14;DFN3X3-8L;SOP;DFN;MSOP;SOIC;SO1R;DF6RSO2R;VS2R;MSOP-10

English Chinese Chinese and English Japanese

2023/08/15

Rev. A2

2.7 MB

- The full preview is over. If you want to read the whole 21 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: