TP2011/TP2012/TP2014 Ultra-Low Power 200nA, 1.6V, RRIO, Push-Pull Output Comparators
■The TP201x family of push-pull output comparators features the world-class lowest nano-power (250nA maximum) and fast 13μs response time capability, allowing operation from 1.6V to 6V. Input common-mode range to supply rails makes the TP201x an ideal choice for power-sensitive, low-voltage (2-cell) applications.
■The TP201x push-pull output supports rail-to-rail output swing and interfaces with TTL /CMOS logic, and are capable of driving heavy DC or capacitive loads. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. The output limits supply current surges and dynamic power consumption while switching. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range.
●Features
■Ultra-Low Supply Current: 200 nA per channel
■Fast Response Time: 13 μs Propagation Delay, with 100 mV Overdrive
■Internal Hysteresis for Clean Switching
■Offset Voltage: ± 12.0 mV Maximum
■Input Bias Current: 6 pA Typical
■No Phase Reversal for Overdriven Inputs
■Low Supply Voltage: 1.6V to 6V
TP2011 、 TP2012 、 TP2014 、 TP201x family 、 TP201x 、 TP2011U 、 TP2011U2 、 TP2011-TR 、 TP2011-CR 、 TP2011U -TR 、 TP2011U2L1-TR 、 TP2012-SR 、 TP2012-VR |
|
[ Battery Monitoring ][ Battery Management ][ Alarm Circuits ][ Monitoring Circuits ][ Peak and Zero-crossing Detectors ][ Threshold Detectors ][ Discriminators ][ Sensing at Ground Line ][ Sensing at Supply Line ][ Logic Level Shifting ][ Logic Level Translation ][ Window Comparators ][ Oscillators ][ RC Timers ][ Mobile Communications ][ Notebooks ][ Ultra-Low-Power Systems ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT23;SC70;SOIC;MSOP;TSSOP;SOP;SOT353;SC70-5;SOT23-5;MSOP-8 |
|
English Chinese Chinese and English Japanese |
|
2023/11/22 |
|
REV1.2 |
|
|
|
1.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.