TPT4031 High Speed Quad Differential RS422 Driver
■3PEAK’s TPT4031 is an enhanced RS422 device which meets standard TIA/EIA-422-B with strong ESD protection capability. The BUS-pin can pass ±18kV HBM-ESD, and ±15 kV IEC-Air ESD protection. It works in wide power supply range: from 3.0V to 5.5V VCC, which provides quad driver for balanced communication. It also features the larger output voltage and higher data rate, the TPT4031 can generate 3.9V differential output with 100-Ω Load and 50Mbps data rate in 5.0V power supply, required by high speed field-bus applications. The device can generate 30mA high output drive current, with short protect function in some abnormal operations, the clamp current is less than 150mA.
■The TPT4031’s enable functions can control all four drivers and provide an active-high (G) or active-low (/G) enable input, and they provide the high-impedance state in the power-off condition, which only consume 6uA very low current.
■The TPT4031 is available in an SOP16, and TSSOP16 package, and is characterized from –40°C to 125°C.
●Features
■Meets the TIA/EIA- 422-B requirements
■High speed, up to 50Mbps data rate, and tPLH = tPHL = 8 ns typical
■Low pulse distortion, tsk(p) = 0.5 ns Typical
■Wide power supply voltage 3.0V to 5.5V
■High output-drive current: ±30 mA
■Low quiescent supply current: 30 uA typical
■Differential output voltage in 5.0V VCC 3.9 V typical with 100-Ω Load
■Driver output short protection < 150mA
■Bus-Pin Protection:
◼ ±18 kV HBM protection
◼ ±9 kV IEC-Contact ESD
◼ ±15 kV IEC-Air ESD
◼ Pb-Free
◼ Package: SOP16, TSSOP16
High Speed Quad Differential RS422 Driver 、 enhanced RS422 device 、 quad differential driver |
|
[ Field Transmitters ][ Temperature Sensors ][ Pressure Sensors ][ Motor Controller ][ Position Encoder Systems ][ Factory Automation ][ Industrial Control Networks ][ Process Control Networks ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOP16;TSSOP16;SO3R;SO3;SOP-16-A;TS3R;TS3;TSSOP-16-A |
|
English Chinese Chinese and English Japanese |
|
2021/12/16 |
|
Rev. A.2 |
|
|
|
2.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.