5.0SMDJ Series TVS Diodes
2024-01-30
●Description
■Transient Voltage Suppressor (TVS) is a circuit protection component that either attenuates (reduces) or filters a transient voltage spike (overvoltage), TVS diodes provide critical protection by going into avalanche breakdown within no more than a few nanoseconds after a strike, clamping the transient voltage, and routing its current to the ground.
●Features
■Low incremental surge resistance
■Excellent clamping capability
■Low profile package with built-in strain relief
■Typical IR less than 5.0 μA above 22 V
■5000 W peak pulse power capability with a 10/1000 μs Waveform, repetition rate (duty cycle): 0.01%
■For surface mounted applications to optimize board space
■ Typical failure mode is short from over-specified voltage or current
■ IEC 61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
■ EFT protection of data lines in accordance with IEC 61000 -4-4
■ Very fast response time
■ Glass passivated chip junction
■ High temperature to reflow soldering guaranteed: 260 °C/40sec
■ VBR @ TJ= VBR@25 °C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
■ Plastic package is flammability rated V-0 per Underwriters Laboratories
■ Meet MSL level1, per J-STD-020
■ Matte tin lead–free plated
■ Halogen free and RoHS compliant
■ Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01)
■Transient Voltage Suppressor (TVS) is a circuit protection component that either attenuates (reduces) or filters a transient voltage spike (overvoltage), TVS diodes provide critical protection by going into avalanche breakdown within no more than a few nanoseconds after a strike, clamping the transient voltage, and routing its current to the ground.
●Features
■Low incremental surge resistance
■Excellent clamping capability
■Low profile package with built-in strain relief
■Typical IR less than 5.0 μA above 22 V
■5000 W peak pulse power capability with a 10/1000 μs Waveform, repetition rate (duty cycle): 0.01%
■For surface mounted applications to optimize board space
■ Typical failure mode is short from over-specified voltage or current
■ IEC 61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
■ EFT protection of data lines in accordance with IEC 61000 -4-4
■ Very fast response time
■ Glass passivated chip junction
■ High temperature to reflow soldering guaranteed: 260 °C/40sec
■ VBR @ TJ= VBR@25 °C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
■ Plastic package is flammability rated V-0 per Underwriters Laboratories
■ Meet MSL level1, per J-STD-020
■ Matte tin lead–free plated
■ Halogen free and RoHS compliant
■ Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01)
- +1 Like
- Add to Favorites
Recommend
More>
- Littelfuse‘s Compact SMD TVS Diodes Provide High-Reliability, 66% Increase in Surge Handling for Aerospace and Avionics Applications
- How to Choose a Fuse for Safety?
- The Importance of Fuses in Safe Sockets
- What is the Breaking Capacity of a Fuse
- The Difference between Fuses and Fuses
- What is the Significance of the Rated Voltage of a Fuse
- Determine if the Fuse is Burning (Fuse)?
- How to Choose a Fuse
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.