KH-FSSMAK-L-RG113
■Remove All Burrs.
■Break All Corners And Edges C0.15 MAX.
■Diameter On Common Center And To Be Concentric Within 0.1 mm.
■Impedance: 50Ω; Frequency Range: 0-6 GHZ; VSWR: 1.5 Max.
■Metal Parts Must Be Supplied With Bright Lustrous Finish、Clean & Free From Oil、Grease And Dirt.
■Temperature range: -40°C-+80°C.
■Durability: ≥500 Cycles.
|
|
|
|
Product Drawing |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2023/8/3 |
|
REV A |
|
|
|
349 KB |
- +1 Like
- Add to Favorites
Recommend
- Unlocking Seamless Connections: Kinghelm‘s KH-FAK-K509-B RF Coaxial FAKRA Connector
- Kinghelm‘s KH-FAK-K508-P FAKRA Right Angle Connector: Advancing Electronic Connectivity
- Kinghelm FPC/FFC Connector KH-FG0.5-H2.0-12PIN: High-Quality Connection Solution for Electronic Devices
- Future-Proofing Electronics with the Kinghelm FAKRA Gray KH-FAKRA-G-CB RF Connector
- Kinghelm FPC/FFC Connector KH-FG0.5-H2.0-10PIN: 0.5mm Pin Pitch and 2mm Board Height to Meet the Market’s Miniaturization Trend
- Kinghelm‘s 4-pin FFC Cable KH-FFC-A1.0-4P-100MM Offers Freedom and Flexibility with its 100mm Length
- Reliable Signal Transmission: Kinghelm PCB Antenna KH-FPC2.4G-1.13IPEX-240 for 2.4GHz
- Kinghelm‘s FFC Cable KH-FFC-V0.5-32P-200MM with 32pins and the Total Length of 20cm
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.