GC1131 400-510 MHz RF Front-End Module Data Sheet
●The GEO chip GC1131 is a high-performance, highly integrated RF front-end module, which is mainly designed for 400-510MHz band applications.
●The GC1131 is designed for ease of use and maximum flexibility with fully matched 50 Ω TX and RX inputs and antenna outputs, and digital controls compatible with 1.2 to 3.6 V CMOS levels.
●The GC1131 is packaged in a 16-pin, 3.0 x 3.0 x 0.75 mm Multi-Chip Module (MCM) package.
■Features:
●Integrated PA with +31 dBm output power
●Integrated LNA with noise figure of 2dB, typical
●Alternate TX input pin simplifies connection to any SoC
●Transmit bypass path with low loss: < 0.8 dB
●Single-ended 50 Ω input and output ports
●Fast turn-on/turn-off time: <2 μs Rx mode and <4 μs Tx mode
●Supply voltage on VCC up to 5 V
●Sleep mode current: < 1 μA
●MCM (16-pin, 3.0 x 3.0 x 0.75 mm) NiPdAu plated package
|
RF Front-End Module 、 GEO chip 、 high-performance, highly integrated RF front-end module |
|
|
[ Automated meter reading ][ ISM systems ][ IoT Modules ][ LoRa ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
MCM |
|
|
English Chinese Chinese and English Japanese |
|
|
2023/02/07 |
|
|
Rev0.2 |
|
|
|
|
|
732 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
