RF Transmitter Module SR3225SAA
RF transmitter module SR3225SAA is a wireless transmitter module for the UHF range. This module houses a crystal resonator, capacitors for an oscillation circuit, a PLL, and a Power Amp in a 3.2 mm x 2.5 mm ceramic package. The crystal resonator is optimally matched with the IC at the factory. The SR3225SAA is ideal for small wireless transmitters because wireless transmission can be achieved simply by combining it with an external controller.
●Output frequency range: 300 MHz to 465 MHz (0.25 kHz Step), 600 MHz to 930 MHz (0.49 kHz Step)
●Δ-Σ fractional-N PLL
●Programmable power amplifier (PA) output power: -15 dBm to 1dBm, -5 dBm to 11 dBm for each 64steps
●Modulation types: ASK/OOK/FSK with Soft-ASK and/or Soft FSK shaping
●Multi-channel (up to 4 channels), channel hopping capability
●3-wire/4-wire SPI interface for Special Function Register (SFR)
●SFR (Special Function Register)
●Fail-safe mechanism (PLL Loss of Lock: LOL, VCO auto-calibration error, Under Voltage Detection: UVD)
●Embedded 32 MHz crystal resonator and crystal oscillation circuit
●Synchronous transmission mode with crystal clock
●Programmable clock output via CKOUT
●Programmable voltage threshold of Under Voltage Detection (UVD): 4 step (1.8 V to 2.4 V)
●10-pin ceramic 3.2 mm x 2.5 mm package
●Supply voltage 1.8 V to 3.6 V
●Operating temperature: -40°C to +85°C
●Pb-free/RoHS-compliant
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Feb. 16, 2017 |
|
Revision 07 |
|
ETM54E-07 |
|
4.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.