1EDI EiceDRIVER™ Enhanced 1EDI30J12CP Single JFET Driver IC
■Description
▲The 1EDI30J12CP is an advanced single channel JFET gate driver. The driver is built to drive a normally-on CoolSiC™ JFET together with a low voltage P-channel MOSFET in a switching loss optimized Direct Drive JFET Topology.
▲The device consists of two galvanic separated parts. The input signals are TTL level compatible with a high-voltage capability of up to 17.5V. The output chip is directly driving a CoolSiC™ JFET and MOSFET with rail to rail output stages.
■Product Highlights
▲Single driver for normally-on JFET
▲Galvanic isolation
▲Signal transmission via Coreless Transformer
▲Supporting Direct Drive JFET Topology
■Features
▲Single channel isolated JFET driver
▲Optimized for 1200V Infineon CoolSiC™ JFETs
▲Extremely low propagation delay of typ. 80ns
▲Extremly high common mode transient immunity of 100V/ns
▲Minimal 3A rail-to-rail output
▲Safe turn off during start up
▲Supports bootstrap operation
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
PG-DSO-19-4 |
|
English Chinese Chinese and English Japanese |
|
November 2014 |
|
Rev. 1.3 |
|
|
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
- II-VI Incorporated Signs Multi-Year Contract to Supply Infineon with Silicon Carbide Substrates for Power Electronics
- Vincotech‘s flowNPC 0 & 1 with Infineon TRENCHSTOP™ IGBT5 - Higher Performance, Lower Spend
- Vincotech flowBOOST 1 sym - Featuring Infineon TRENCHSTOP™ IGBT5 Chips and Designed for 100A and 150A
- Brite Launches High-Precision 16-bit 1MHz SAR ADC with Power Dissipation of 4.25mA and Achieving 14-bit ENOB
- Kinghelm RF Coaxial Connector IPEX Generation 1 KH-3030175-Y1 Provide Excellent Transmission Performance and Reliability
- Nisshinbo Releases the NA2202/NA2203/NA2204 Series, 5V Analog Front End with High Precision 16/20/24-Bit A-D Converter
- The Differences between IPEX Generation 1 and Generation 4
- Alliance Memory Offered Discontinued Cypress Semiconductor CY62256 Low Power SRAMs With Original Part Numbers Into 2019
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.