ISL28022EVKIT1Z ISL28022 Digital Power Monitor Evaluation Kit
The ISL28022 Digital Power Monitor (DPM) evaluation kit is a three evaluation board design that demonstrates the functionality of the ISL28022. By design, the ISL28022 is considered a digital helper for a variety of applications ranging from energy optimization to diagnostics of complex systems. The three board evaluation kit demonstrates the functionality of the DPM for three specific applications while offering a configurable board for users to connect to their systems.The DPM Evaluation kit is accompanied by a graphical user interface (GUI) that allows the user to configure the ISL28022 for monitoring bus voltage and current in a specific application. The GUI has a data save feature allowing the transfer of measurement data to another software application for analysis.
The ISL28022 DPM evaluation kit consists of three boards; a dongle, a generic ISL28022 board, and a RLOAD board. The dongle board mates from a PC to the ISL28022 via a microcontroller. The microcontroller converts USB commands sourced from the PC to an I2C header. The I2C pins (SCL and SDA) are connected to the right angle header at the edge of the board. The dongle board has three circuits that convert the USB supply voltage from 5V to 3.3V, 12V and a selectable point of load (POL) voltage. Each voltage translation circuit has a ISL28022 connected to monitor the current sourced by the supply. Each circuit has been optimized to measure 100mA at full scale. The three supply voltages are routed to the right angle connector along with the I2C pins, SDA and SCL.
ISL28022EVKIT1Z 、 ISL28022 、 336-1259-ND 、 C8051F320LQFP32 、 ISL80101IR33Z-T-ND 、 ISL80101IR33Z-T 、 ISL80101RAJZ-ND 、 ISL80101IRAJZ 、 ED90064-ND 、 897-43-004-90-000000 、 ISL28022FRT 、 ISL84781FRT |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
February 17, 2016 |
|
Rev 3.00 |
|
AN1875 |
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.