P4KE series 6.8 To 600V 400W Axial Lead Transient Voltage Suppressors (TVS)
2023-11-09
●Description
■The P4KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
●Features
■Glass passivated chip junction in DO-41 Package
■Low leakage
■Uni and Bidirectional unit
■Excellent clamping capability
■400W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01%
■Fast response time: typically less than 1.0ps from 0 Volts to VBR min
■Typical IR less than 5μA above 10V
■High Temperature soldering: 260°C/40 seconds at terminals
■Typical maximum temperature coefficient ΔV BR = 0.1% × VBR @25°C× ΔT
■Plastic package has Underwriters Laboratory Flammability 94V-0
■Matte tin lead–free Plated
■Halogen free and RoHS compliant
■Typical failure mode is short from over-specified voltage or current
■Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
■ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
■EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
■The P4KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
●Features
■Glass passivated chip junction in DO-41 Package
■Low leakage
■Uni and Bidirectional unit
■Excellent clamping capability
■400W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01%
■Fast response time: typically less than 1.0ps from 0 Volts to VBR min
■Typical IR less than 5μA above 10V
■High Temperature soldering: 260°C/40 seconds at terminals
■Typical maximum temperature coefficient ΔV BR = 0.1% × VBR @25°C× ΔT
■Plastic package has Underwriters Laboratory Flammability 94V-0
■Matte tin lead–free Plated
■Halogen free and RoHS compliant
■Typical failure mode is short from over-specified voltage or current
■Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
■ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
■EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.