U254-05XX-4BH23-X2S MICRO USB
■MATERIAL SPECIFICATION:
▲HOUSING:LCP,UL94 V-0 BLACK.
▲CONTACTS:BRASS(C2680 T=0.15)
▲FRONT SHELL:STAINLESS STEEL(SUS304 T=0.3)
■PLATING SPECIFICATION:
▲CONTACTS:Ni 50u" MIN. UNDER PLATED OVER ALL. Au PLATED ON THE FUNCTIONAL AREA OF CONTACT.(GOLD PLATING THICKNESS FOLLOW THE P/N) PLATING SPECIFICATIONS OF THE SOLDER AREA FOLLOW
FRONT SHELL:SEE TABLE 1.50u" MIN. NICKEL UNDER PLATING OVER ALL.
■MECHANICAL PERFORMANCE,
▲INSERTION FORCE:3.5Kgf MAX
▲REMOVAL FORCE:0.8kgf MIN
▲DURABILITY:10000 CYCLES.
■ELECTRICAL PERFORMANCE,
▲CURRENT RATING:
◆VBUS & GND PINS: 1.8A MAX.
◆OTHER PINS: 0.5A MAX.
▲LLCR:
◆VBUS & GND PINS AND OTHER PINS: 30mΩ/PIN MAX.
◆SHIELD: 50mΩ/MAX.
◆LLCR MAX. CHANGE OF ALL PINS: 10mΩ.
▲INSULATION RESISTANCE:100MΩ MIN
▲DIELECTRIC WITHSTAND VOLTAGE,AC 100V FOR 1 MINUTE.
■ENVIRONMENTAL PERFORMANCE:
▲OPERATING TEMPERATURE: -25°C~+85°C.
■IR REFLOW:
▲THE PEAK TEMPERATURE ON THE BOARD SHALL BE MAINTAINED FOR 10 SECONDS AT 260°C.
|
|
Product Drawing |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2023/9/16 |
|
Revision A0 |
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
- 3PEAK TPU25401 Highly Integrated Auto-Grade PMIC Chip Empowers Efficient and Stable Power Supply for Automotive Cockpits and ADAS
- Connection Form of Industrial Connector
- With Integrated Connection Technology, PTR HARTMANN Presents A New Concept For Electrical Contacting and Provides a Innovative and Flexible Connection Solution
- Terminal Connection Method of Electrical Connectors
- Introduction to Bluetooth Multi Connection
- Configuration and Connection Debugging of Serial Device Server
- BLE Connection Roles Central/Master vs. Peripheral/Slave
- Supu Launches the Newest Push-In Spring Connection Contact Module, Improving Wiring Efficiency by up to 80%
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.