FSC-BT677B Bluetooth 5.2 & 0dBm maximum power output Wireless MCU Module Datasheet
■FSC-BT677B use a Bluetooth low-power chip includes a 38.4 MHz ARM Cortex-M33 microcontroller which delivers a maximum power output of 0 dBm. The chip's maximum receive sensitivity is -98 (1 Mbps 2 GFSK) dBm, supporting a complete DSP instruction set and floating point unit for faster calculations. Low-power Gecko technology, support fast wake-up time and energy-saving modes. The BT677B software and SDK support for Bluetooth Low Energy (BLE), Bluetooth 5.2 and Bluetooth mesh networks. The module also support for proprietary wireless protocol development.
■FSC-BT677B combines an energy-friendly MCU with a highly integrated radio transceiver. The module is suited for any battery operated application other systems requiring high performance and low energy consumption.
●Features
■2.4-GHz RF Transceiver Compatible With Bluetooth low energy (BLE) 5.2 standard
■Integrate MCU to execute Bluetooth protocol stack.
■Postage stamp sized form,
■Low power
■Class 2 support(up to 0 dBm)
■The default UART Baud rate is 115.2Kbps and can support from 1200bps up to 921.6Kbps.
■UART, 12-bit ADC@ 1 Msps, 16-bit @ 76.9 ksps data connection interfaces.
■Support the OTA upgrade.
■Bluetooth stack profiles support: LE HID, and all BLE protocols.
■PWM
■An external 32.768 kHz crystal oscillator provides accurate timing reference for low energy modes
Bluetooth 5.2 & 0dBm maximum power output Wireless MCU Module |
|
[ battery operated application ][ IoT Sensors ][ End Devices ][ Health Devices ][ Medical Devices ][ Home Automation ][ Accessories Devices ][ Human Interface Devices ][ Metering Devices ][ Commercial Lighting and Sensing ][ Retail Lighting and Sensing ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/07/6 |
|
Version 1.2 |
|
|
|
2.9 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.