U-D-M5DS-W-3 USB CONNECTOR
●NOTE:
■MATERIAL SPECIFICATION:
▲HOUSING: LCP, UL94 V-0 BLACK.
▲CONTACTS: BRASS (C2680)
▲FRONT SHELL: STAINLESS STEEL (SUS304)
■PLATING SPECIFICATION:
▲CONTACTS:
◆Ni 50u" MIN. UNDER PLATED OVER ALL.
◆Au PLATED ON THE FUNCTIONAL AREA OF CONTACT. (GOLD PLATING THICKNESS FOLLOW THE P/N)
◆PLATING SPECIFICATIONS OF THE SOLDER AREA FOLLOW THE P/N
▲FRONT SHELL:
◆PLATING SPECIFICATIONS FOLLOW THE P/N
■MECHANICAL PERFORMANCE,
▲INSERTION FORCE: 3.5Kgf MAX
▲REMOVAL FORCE: 0.8kgf MIN
▲DURABILITY: 10000 CYCLES.
■ELECTRICAL PERFORMANCE,
▲CURRENT RATING:
◆VBUS & GND PINS: 1.8A MAX.
◆OTHER PINS: 0.5A MAX.
▲LLCR:
◆VBUS & GND PINS AND OTHER PINS: 30mΩ/PIN MAX.
◆SHIELD: 50mΩ/MAX.
◆LLCR MAX. CHANGE OF ALL PINS: 10mΩ.
▲INSULATION RESISTANCE: 100MΩ MIN
▲DIELECTRIC WITHSTAND VOLTAGE,AC 100V FOR 1 MINUTE.
■ENVIRONMENTAL PERFORMANCE:
◆OPERATING TEMPERATURE: -25℃~+85℃.
■IR REFLOW:
◆THE PEAK TEMPERATURE ON THE BOARD SHALL BE MAINTAINED FOR 10 SECONDS AT 260℃.
|
|
Product Drawing |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2023.6.6 |
|
REV. A |
|
|
|
149 KB |
- +1 Like
- Add to Favorites
Recommend
- Kinghelm‘s Micro-B Connector KH-MICRO5P-JN Commonly Used for USB Interfaces, Including the USB 2.0 and USB 3.0 Standards
- Dual Port USB Type-C Controller LDR6282 Designed for USB PD Docking Stations with Video Output
- FT232 USB Bridge ICs, a Powerful Chip with a Complete USB Protocol
- Kinetic Technologies Launches USB VBUS Safety Management Current Limited Load Switch Supporting the Latest 28V Level of USB PD3.1 EPR Systems
- Overview and Advantages of Micro USB
- Kinghelm‘s USB Connector KH-USB-AM-HX3, Featuring with High-speed Transmission, Strong Reliability and Wide Compatibility
- Kinghelm‘s Type-A Male Connector KH-USB-AM-4P-CB is Complies with the USB 2.0 Standard
- Kinghelm‘s USB 2.0 Type-A Male Connector KH-USB-AM-2712 Achieves Simple and Fast Data Exchange
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.