AH8231 HALL SWITCH OMNIPOLAR HALL EFFECT SWITCH IC
●The AH8231 is designed to integrate pole independent Hall sensor with output driver together on the same chip. Either North or South magnetic field with sufficient strength will turn the output on (low). In the absence of a magnetic field, output is off (high).
●The polarity independence allow AH8231 to easily replace reed switches for superior reliability and case of manufacturing.
●To improve stability, it includes a temperature compensated voltage regulator, a differential amplifier, a Hysteresis controller, and an open collector output driver capable of sinking up to 20mA current load. The temperature dependent bias increases the supply voltage of the hall plates and adjusts the switching points to the decreasing induction of magnets at higher temperatures. Subsequently, the output can keep switching on/off on more precise switch point regardless to the ambient temperature. AH8231 are rated for operation over temperature range from -20°C to +85°C and voltage ranges from 2.4 V to 26 V.
●AH8231 is available in a SOT-23 and TO-92S packages.
■FEATURES:
●Operates from 2.4 V to 26 V supply voltage
●Operation with North or South Pole
●On chip Hall Sensor and driver
●On chip temperature compensation circuitry minimizes shifts in on and off points and hysteresis over temperature and supply voltage
●On chip voltage regulator to stabilize On/Off switch point
●Wide range operating temperature -20 ~ +85°C
●On (L) with South or North magnetic field and Off (H) with No magnetic field
AH8231 、 AH8231E3R-X 、 AH8231E3VR-X 、 AH8231ZSB-X 、 AH8231ZSVB-X |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT-23;TO-92S |
|
English Chinese Chinese and English Japanese |
|
MAR 2023 |
|
REV1.0 |
|
|
|
853 KB |
- +1 Like
- Add to Favorites
Recommend
- AiT A6303 Series——300mA, Positive Voltage Output CMOS LDO Regulators
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- AiT A7545 current mode boost DC-DC converter with Adjustable Output up to 9V and Internal Fixed PWM frequency of 1MHz
- AiT A713 DC-to-DC Step-down Switching Regulator with High Efficiency of up to 95%, ideal for Low-voltage Power Conversions
- AiT Offers Wide Range of Highly Precise SMD/TH Crystal Components in Half Size, Full Size, Cylindrical and Tuning Fork Packages
- AiT Offers Compact SMD Power Inductors Available in SMD Size Range from 0602 to 1812
- AiT offers 1A Linear Li-ion Batteries Charger IC A4051 for Single-cell Lithium-ion Batteries
- AiT‘s A7115B: a 1.5A, 2MHz High Efficiency Buck DC-DC Converter for Powering Portable Equipment
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.