MIC29302 3A Fast-Response LDO Regulator
●Along with a total accuracy of ±2% (over temperature, line and load regulation) the regulator features very-fast transient recovery from input voltage surges and output load current changes.
●The MIC29302 has an adjustable output which can be set by two external resistors to a voltage between 1.24V to 15V. In addition, the device is fully protected against over current faults, reversed input polarity, reversed lead insertion, and overtemperature operation. A TTL logic enable (EN) pin is available in the MIC29302 to shutdown the regulator. When not used, the device can be set to continuous operation by connecting EN to the input (IN). The MIC29302 is available in the standard and 5-pin TO-263 and TO-252 packages with an operating junction temperature range of −40°C to +125°C.
●Features
■High-current capability
■3A over full temperature range
■Low-dropout voltage of 450mV at full load
■Low ground current
■Accurate 1% guaranteed tolerance
■Extremely-fast transient response
■Zero-current shutdown mode
■Error flag signals output out-of-regulation
■Adjustable output voltage
■Packages: TO263-5、TO220-5 and TO252-4
Fast-Response LDO Regulator 、 high-current, low-cost, low-dropout voltage regulator 、 LDO regulator |
|
[ Processor peripheral ][ I/O supplies ][ High-efficiency “Green” computer systems ][ Automotive electronics ][ High-efficiency linear lower supplies ][ Battery-powered equipment ][ PC add-in cards ][ switching supply ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TO220-5;TO263-5;TO220-5-A2;TO263-5-A2;TO252-4 |
|
English Chinese Chinese and English Japanese |
|
2014 AUG |
|
|
|
|
|
2.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.