Low Phase Jitter Crystal Oscillator: SG2016VHN/SG2520VHN
■5G will increase network communication traffic exponentially. A 5G communication network requires high-speed and wide bandwidth, while keeping the noise level to a minimum. This can be achieved with a high frequency, low jitter reference clock for the communication equipment. Optical communication modules for 400 Gbps / 800 Gbps transmission over 80 km require a small form factor, ±20 × 10-6 stability reference clock.
■The SG2016VHN/SG2520VHN is the next generation to the very popular SG3225VEN family offering the same combination of features with a wide range of available frequencies, low jitter, and improved frequency tolerance performance due to using an in-house designed IC with temperature compensation in a 63% smaller package.
●Features
■Crystal oscillator (SPXO)
■Frequency range (fo): 25 MHz to 500 MHz
■Output: LVDS
■Supply voltage: 1.8 V Typ. / 2.5 V Typ. / 3.3 V Typ.
■Operating temperature: -40 °C to +105 °C
■Frequency tolerance: ±20 × 10⁻⁶
■Low phase jitter: 38 fs Typ. (fo = 156.25 MHz)
SG2016VHN 、 SG2520VHN 、 X1G006121xxxx15 、 X1G005941xxxx15 、 SG2016VHN156.250000MHzCCGPZA 、 X1G006121xxxxxx |
|
Low Phase Jitter Crystal Oscillator 、 Crystal oscillator 、 SPXO |
|
[ Optical communication modules ][ communication equipment ][ Network equipment ][ Router ][ Switch ][ Optical module ][ Data center ][ Test Equipment ][ Measurement Equipment ][ Factory Automation ][ High Speed Converters ][ ADC ][ DAC ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2023/6/1 |
|
Ver1.01 |
|
SGxxxxVHN_E_Ver1.01 |
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Epson Newly Launched SG2016 Series Spxos which are at 54% Smaller Than SG2520 Series, and Ideal for High Bandwidth Optical Modules such as 800G Transceivers
- News | Epson Launches 4th-Generation Optical Engine for Smart Glasses
- Seismic Intensity Meters Equipped with Epson‘s M-A352 Accelerometer Certified by the Japan Meteorological Agency
- Epson Develops an New Industrial 3D Printer that Can Use Commonly Available Materials
- High-stability GYRO Sensor by Epson with Bias Output Stability and Low Noise
- Epson to Start Selling New Sensing Technologies and Launch New Sensing Analysis Technology Business
- Epson Becomes the Manufacturing Industry‘s First to Switch to 100% Renewable Electricity at All Sites in Japan
- Epson Begins Volume Production of the SG2520 Series of Tiny, High-Frequency, Low Phase Jitter SPXOs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.