RL78/G1H, RAA604S00 Control method of RF front-end components

2023-06-01
■Introduction
●This document describes the control method when using RL78/G1H (LSI chip for sub-GHz-band wireless communications) and RF front-end components such as switches and amplifiers, and the parameter setting method using the RF driver.
●Although it describes RL78/G1H, RAA604S00 can control RF front-end components by the same method.
●Note: The contents of this document are provided as an example for reference and do not guarantee the signal quality in systems. When implementing this example into an existing system, thoroughly evaluate the product in the overall system and apply the contents of this document at your own responsibility.
■Overview
●When designing a board using RL78 / G1H and RF front-end components, RF front-end components must be properly controlled.
●The RF driver provided by our company has parameters (Information Base) for controlling the RF front-end components. In order to properly control the RF front-end components, the user should set the IB value according to the RF front-end components to be used.
●This document explains the IB of the RF driver and introduces connection examples between the RL78/G1H and RF front-end components.

Renesas

RL78/G1HRAA604S00

More

Part#

LSI chipRF driver

More

sub-GHz-band wireless communications ]

More

Application note & Design Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

Nov.30.2021

Rev.2.00

R01AN4968EJ0200

1.3 MB

- The full preview is over. If you want to read the whole 20 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: