RL78/G1D Group RL78/G1D Solution Kit – PMOD Module Hardware Manual
●This document represents RL78/G1D Solution Kit’s PMOD module. The document describes hardware platform information such as PMOD™ peripheral connection, RL78/G1D-SK Bluetooth® module interface and its Bluetooth® connectivity, bill of materials, and schematics.
■Overview
●RL78/G1D-SK PMOD module has two sections: Bluetooth® module (RL78/G1D-SK) and PMOD™ connector (PMOD) with power consumption measurement.
●This module allows you to measure current consumption for RF section and microcontroller (MCU) section using R1 and R4 respectively. To measure current, remove the resistor and attach current probe to the resistor pads. Read the current value from the meter.
●The PMOD and RL78/G1D-SK sections are divided by breakaway groove at bottom side. Figure 1 shows top and bottom view of the module including breakaway groove marking. After breaking the board, you get small Bluetooth® low energy technology module (RL78/G1D-SK) which has 30 solder pads at bottom side for power supply, debug/program interface, and I/O interface. Once broken into two pieces, the PMOD™ section is of no use.
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
July 31, 2016 |
|
|
Rev.1.00 |
|
|
R01AN2919EU0100 |
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
