1.5KE Series TVS Diodes
2023-05-26
●Description
■The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
●Features
■1500 W peak pulse capability at 10/1000 μS waveform, repetition rate (duty cycles):0.01%
■Glass passivated chip junction or Planar chip (< 10 V ) in DO-201 Package
■Fast response time: typically less than 1.0 PS from 0 Volts to BV min
■Excellent clamping capability
■Typical failure mode is short from over-specified voltage or current
■Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■IEC-61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
■ESD protection of data lines in accordance with IEC 61000-4-2
■EFT protection of data lines in accordance with IEC 61000-4-4
■Low incremental surge resistance
■Typical IR less than 1 μA when VBR min>12 V
■High temperature to reflow soldering guaranteed: 260 °C/30 sec / 0.375”,(9.5 mm) lead length, 5 lbs., (2.3 kg) tension
■VBR @ TJ= VBR@25 °C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
■Plastic package is flammability rated V-0 per Underwriters Laboratories
■Matte tin lead–free plated
■Halogen free and RoHS compliant
■Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDECJ-STD-609A.01)
■The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
●Features
■1500 W peak pulse capability at 10/1000 μS waveform, repetition rate (duty cycles):0.01%
■Glass passivated chip junction or Planar chip (< 10 V ) in DO-201 Package
■Fast response time: typically less than 1.0 PS from 0 Volts to BV min
■Excellent clamping capability
■Typical failure mode is short from over-specified voltage or current
■Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
■IEC-61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
■ESD protection of data lines in accordance with IEC 61000-4-2
■EFT protection of data lines in accordance with IEC 61000-4-4
■Low incremental surge resistance
■Typical IR less than 1 μA when VBR min>12 V
■High temperature to reflow soldering guaranteed: 260 °C/30 sec / 0.375”,(9.5 mm) lead length, 5 lbs., (2.3 kg) tension
■VBR @ TJ= VBR@25 °C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
■Plastic package is flammability rated V-0 per Underwriters Laboratories
■Matte tin lead–free plated
■Halogen free and RoHS compliant
■Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDECJ-STD-609A.01)
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
