SOFT-SHIELD® 5000 Low Closure Force, Conductive Fabric Jacket Over Foam Core EMI Gaskets
2023-05-18
●Customer Value Proposition:
■Parker Chomerics SOFT-SHIELD® 5000 Series gaskets offer a low cost and high performance EMI gasketing solution for commercial electronic systems. This product has been obsoleted as of 2019 and has been replaced with SOFT-SHIELD 3500. Cross referenced part numbers can be found on the last page of this document.
■The high reliability conductive fabric over foam core construction provides a cost effective alternative to beryllium copper or stainless steel fingerstock EMI gaskets. Applications for these conductive fabric over urethane foam core gaskets include; commercial electronic enclosures, medical electronics and general industrial applications. The variety of available cross-section profiles allow for very low closure forces, thus offering a minimization of the number of necessary fasteners for easy, user friendly installation, without an effect to shielding effectiveness. Cut-to-length strips of gasket are self terminating thereby enhancing the reliability of the application. The urethane foam core has excellent compressibility making the gasket material especially attractive for thin-walled plastic enclosures. Gaskets are offered standard with a UL 94 V-0 flammability rating.
●Product Features:
■Low closure force required for optimum performance.
■Provides shielding effectiveness over 90 dB from 10 MHz to 10 GHz.
■Silver nickel-plated, woven, ripstop nylon jacket over highly compressible urethane foam core.
■Supplied standard with a pressure sensitive acrylic based adhesive (PSA)
■Self terminating jacket – no loose fibers or sharp edges when gasket is cut.
■No degradation of shielding effectiveness after 10,000 deflection cycles.
■Supplied in standard 8 foot lengths in multiple cross section styles including rectangular, square, D-shape, C-fold, astragel, P-shape, triangular, and knife-edge with rigid inserts. Custom profiles are also possible.
■Available as kiss-cut parts on polyester film release liner for “peel and stick applications.
■Available as individual pre-cut pieces.
■Single-piece “picture frame” gaskets can also be fabricated from continuous lengths, incorporating integral pre-cut notches.
■UL 94V-0 rated.
■RoHS & REACH compliant
■Parker Chomerics SOFT-SHIELD® 5000 Series gaskets offer a low cost and high performance EMI gasketing solution for commercial electronic systems. This product has been obsoleted as of 2019 and has been replaced with SOFT-SHIELD 3500. Cross referenced part numbers can be found on the last page of this document.
■The high reliability conductive fabric over foam core construction provides a cost effective alternative to beryllium copper or stainless steel fingerstock EMI gaskets. Applications for these conductive fabric over urethane foam core gaskets include; commercial electronic enclosures, medical electronics and general industrial applications. The variety of available cross-section profiles allow for very low closure forces, thus offering a minimization of the number of necessary fasteners for easy, user friendly installation, without an effect to shielding effectiveness. Cut-to-length strips of gasket are self terminating thereby enhancing the reliability of the application. The urethane foam core has excellent compressibility making the gasket material especially attractive for thin-walled plastic enclosures. Gaskets are offered standard with a UL 94 V-0 flammability rating.
●Product Features:
■Low closure force required for optimum performance.
■Provides shielding effectiveness over 90 dB from 10 MHz to 10 GHz.
■Silver nickel-plated, woven, ripstop nylon jacket over highly compressible urethane foam core.
■Supplied standard with a pressure sensitive acrylic based adhesive (PSA)
■Self terminating jacket – no loose fibers or sharp edges when gasket is cut.
■No degradation of shielding effectiveness after 10,000 deflection cycles.
■Supplied in standard 8 foot lengths in multiple cross section styles including rectangular, square, D-shape, C-fold, astragel, P-shape, triangular, and knife-edge with rigid inserts. Custom profiles are also possible.
■Available as kiss-cut parts on polyester film release liner for “peel and stick applications.
■Available as individual pre-cut pieces.
■Single-piece “picture frame” gaskets can also be fabricated from continuous lengths, incorporating integral pre-cut notches.
■UL 94V-0 rated.
■RoHS & REACH compliant
- +1 Like
- Add to Favorites
Recommend
More>
- On the Cutting Edge: How Parker Chomerics Helps SpaceX Soar
- Sekorm Became an Authorized Distributor of Parker Chomerics
- 5.2W/m-K High Reliability, Fully Cured, Dispensable Thermal Gel from Parker Chomerics
- PARKER CHOMERICS New Electrically Conductive Sealant CHO-BOND 1018 Offers Unique Combination: Galvanic Compatibility to Aluminium and Fluid/Fuel Resistance
- Parker Chomerics‘ THERM-A-GAP™ Gel 20 One-component Thermal Interface Material with 2.4W/m-k Thermal Conductivity Ideal for Automotive Industry Applications
- News | Thermal Interface Materials for Challenging Private Spaceflight Applications
- Easy-access CAD Models for Conductive Elastomer Extrusion Profiles Help Accelerate Design Cycles
- Parker’s New Critical Protection (CP) Hose Cover Extends Service Life in the Toughest Environments
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
