SIT1021 Local Interconnect Network (LIN) transceiver

2023-03-09
●DESCRIPTION
■The SIT1021 is a physical layer transceiver of Local Interconnect Network (LIN). It is compliant with LIN 2.0/LIN 2.1/LIN 2.2/LIN 2.2A/ISO 17987-4:2016 (12V) and SAE J2602 standards. It is typically used for low speed in-vehicle networks using baud rates from 1 kBd to 20 kBd. The LIN protocol data stream at the transmit data input (TXD) is converted by the SIT1021 into a bus signal with optimized wave shaping to minimize ElectroMagnetic Emission (EME). The SIT1021 converts the data stream on LIN bus to logic level signals that are sent to the microprocessor via the pin RXD. The LIN bus is pulled high by the internal slave resistor and a series diode. Master applications require an external pull-up resistor in series with a diode to connect pin VBAT and pin LIN.
■The SIT1021 has an extremely low current consumption in sleep mode. The power consumption is reduced to a minimum if in failure modes. It also provides a high voltage output pin INH to enable an external high voltage regulator which used to support the microprocessor.
●FEATURES
■LIN 2.x/ISO 17987-4:2016 (12V)/SAE J2602 compliant
■Thermally protected
■Transmit data (TXD) dominant time-out function
■Bus terminal current limit protected
■Under voltage on battery
■Very low current consumption in Sleep mode
■Support local and remote wake-up
■Enable an external high voltage regulator by INH
■Baud rates up to 20 kBd
■Very low ElectroMagnetic Emission (EME)
■High ElectroMagnetic Immunity (EMI)
■Available in SO8 and DFN3*3-8 packages

SIT

SIT1021SIT1021TSIT1021TK

More

Part#

Local Interconnect Network (LIN) transceiverphysical layer transceiverinterface device

More

More

Datasheet

More

More

Please see the document for details

More

More

SO8;DFN3*3-8

English Chinese Chinese and English Japanese

January 2023

REC V1.7

1.5 MB

- The full preview is over. If you want to read the whole 19 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: