IntegraVision Power Analyzer Model PA2203A
■The Keysight IntegraVision power analyzer is an intuitive combination of accurate power measurements and touch-driven oscilloscope visualization. Within a single instrument, it delivers the dynamic views you need to see, measure and prove the performance of your design.
●Key specifications
■4 channels; each measures voltage, current and power; suitable for 1 and 3-phase AC
■Isolated and floating to 1000 Vrms (Cat II)
■5 M samples/second at 16 bits on every waveform simultaneously
■Basic accuracy: voltage = 0.05% of reading + 0.05% of range; power = 0.1% of reading + 0.05% of range
■Timebase: 50 s/div (500 seconds) maximum; 20 μs/div (200 μs) minimum
■Voltage: Measures 1000 Vrms / 2000 Vpeak with BW up to 2.5 MHz
■Current: Measures current directly using 2 internal shunts (2 Arms and 50 Arms) with BW up to 100 KHz
■Supports external current probes and transducers of up to 10 V full scale with BW up to 2.5 MHz
■Log data to external USB drive with intervals as fast as 50 ms per reading
■Voltage and current measurements of DC, ACrms, ACrms with DC, Frequency, Maximum, Minimum, Crest Factor
■Power measurements of Real Power, Apparent Power, Reactive Power, Phase Angle, Power Factor
■Measures: Voltage or current harmonics up to 250 orders, Efficiency, Amp-Hours, Watt-Hours, VA-Hours
■29 pre-defined waveform measurements
■Check pre-compliance to IEC 61000-3-2 (classes A, B, C, and D)
■Calibration cycle: 1 year
|
|
Supplier and Product Introduction |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
December 1, 2017 |
|
|
|
5992-1054EN |
|
557 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.