RS0204 4-Bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing

2023-01-11
●DESCRIPTIONS
■This 4-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.2V to 3.6V while it tracks the VCCA supply, and the B ports supporting operating voltages from 1.65V to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.2V,1.5V,1.8V,2.5V,3.3V and 5V voltage nodes. VCCA must not exceed VCCB.
■When the output-enable (OE) input is low, all outputs are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. OE has an internal pull-down current source, as long as VCCA is powered.
■To ensure the high-impedance state during power up or power down,OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of thedriver.
■The RS0204 is available in Green QFN3.5x3.5-14L, QFN1.7x2-12L and TSSOP-14 packages. It operates over an ambient temperature range of -40°C to +85°C.

RUN-IC

RS0204RS0204YTQF14RS0204YUTQH12RS0204YQ

More

Part#

4-Bit Bidirectional Voltage-Level Translator4-bit non-inverting translatorbidirectional voltage-level translatortranslator

More

Handset ]Smartphone ]Tablet ]Desktop PC ]

More

Datasheet

More

More

Please see the document for details

More

More

QFN3.5x3.5-14L;QFN1.7x2-12L;TSSOP-14

English Chinese Chinese and English Japanese

2022/11/03

REV A.4

1.4 MB

- The full preview is over. If you want to read the whole 25 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: