BL24CS32 32Kbits (4,096×8)
■The BL24CS32 provides 32768 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 4096 byte.
■The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.
■The BL24CS32 offers an additional page, named the Identification Page (32 bytes). The Identification Page canbeused to store sensitive application parameters which can be (later) permanently locked in Read-only mode.
■The BL24CS32 offers a read-only Pre-Program Unique Identification (UID) Page (8 bytes).
●Features
■Compatible with all I²C bidirectional data transfer protocol
■Memory array:
◆32 Kbits (4 Kbytes) of EEPROM
◆Page size: 32 bytes
◆Additional Write lockable page
■Single supply voltage and high speed:
◆1.7V-5.5V
◆1MHz
■Random and sequential Read modes
■Write:
◆Byte Write within 3ms
◆Page Write within 3ms
◆Partial Page Writes Allowed
■Write Protect Pin for Hardware Data Protection
■Schmitt Trigger, Filtered Inputs for Noise Suppression
■High-reliability
◆Endurance: 1 Million Write Cycles
◆Data Retention: 100 Years
■Enhanced ESD/Latch-up protection
◆HBM 8000V
■8-lead PDIP/SOP/TSSOP/UDFN and WLCSP4 packages
|
serial electrically erasable and programmable read-only memory 、 EEPROM |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOP8;UDFN;WLCSP;TSSOP8L;PDIP;SOP;TSSOP;WLCSP4;WLCSP-4;SOP-8L;TSSOP-8L;PDIP-8L;UDFN-8L;SOT23-5;TSOT23-5L;M2.2;M3.2 |
|
|
English Chinese Chinese and English Japanese |
|
|
2018/3/14 |
|
|
Version 1.00 |
|
|
|
|
|
1010 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
