CMS80F262x Enhanced 1T 8051 microcontroller with flash memory Datasheet
■System Introduction
▲CMS80F262x series is an 8051 core, a 1T instruction system compatible with MCS-51, and a general IO type 8-bit chip. The operating frequency can reach up to 48MHz. The MCU has the following characteristics:
◆With 64KB program area, 256B RAM space, 4KB XRAM, 1KB Data FLASH area.
◆With four oscillation modes.
◆It supports four working modes: normal, idle 1, idle 2, and sleep, which can effectively reduce power consumption.
◆Built-in low-voltage reset LVR, low-voltage detection LVD, watchdog overflow reset, window watchdog reset and other protection settings can effectively improve the reliability of system operation.
◆With multiple interrupt sources such as external interrupts, timer interrupts and other peripheral interrupts, it can respond to external events in a timely manner and improve the utilization of the MCU.
◆11 timers, which can realize functions such as timing, counting, input capture, output comparison, timing wake-up, and baud rate generator.
◆With hardware multiplication and division unit MDU, cyclic redundancy check unit CRC.
◆LED driver module supports up to 8COM and 24SEG.
◆LCD driver module supports up to 8COM and 32SEG.
◆6-channel 16-bit PWM, supports independent, complementary, and synchronous three-mode output, and has hardware brake function, dead zone control function, mask output and other functions.
◆With 1 I2C, 1 SPI, and 4 UART communication modules, it can realize data transmission between the system and other devices.
◆With high-precision 12-bit ADC and selectable internal reference voltage, up to 2 comparators, and more abundant analog functions.
CMS80F262x 、 CMS80F26282 、 CMS80F2629 、 CMS80F262A 、 CMS80F262B 、 CMS80F262C 、 CMS80F262x series |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOP28;LQFP32;LQFP44;LQFP48;QFN40 |
|
English Chinese Chinese and English Japanese |
|
Sep 2022 |
|
Rev. 1.03 |
|
|
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.