TLC1543 10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS
■The TLC1543C and TLC1543I are CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. These devices allow high-speed data transfers from the host.
■In addition to a high-speed A /D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A /D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.
●10-Bit Resolution A/D Converter
●11 Analog Input Channels
●Three Built-In Self-Test Modes
●Inherent Sample-and-Hold Function
●Total Unadjusted Error...±1 LSB Max
●On-Chip System Clock
●End-of-Conversion (EOC) Output
●Terminal Compatible With TLC542
●CMOS Technology
TLC1543 、 TLC1543CN 、 TLC1543IN 、 TLC1543WM 、 TLC1543IM 、 TLC1543C 、 TLC1543I |
|
10-BIT ANALOG-TO-DIGITAL CONVERTERS 、 10-Bit Resolution A/D Converter 、 CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters 、 converter |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DIP20;SOP20 |
|
English Chinese Chinese and English Japanese |
|
2018 AUG |
|
|
|
|
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.