CSD203P 0V to 65V, 20-Bit, Ultra-Precise, I²C Output Current, Voltage, Temp, and Power Monitor with Alert
■The CSD203P is a current shunt and power monitor with an I²C or SMBUS compatible interface. The device monitors a shunt voltage drop, bus supply voltage, and die temperature. Programmable calibration value, conversion times, and averaging, combined with an internal multiplier, enable direct readouts of current in amperes and power in watts.
■The CSD203P senses current on common-mode bus voltages that can vary from 0V to 6 5 V, independent of the supply voltage. The device operates from a single 2.7V to 5.5V supply, drawing a typical of 330μA of supply current. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses on the I²C- compatible interface.
●FEATURES
■Senses Bus Voltages:
▲From 0V to 65V
■High-Side or Low-Side Sensing
■Reports Current, Voltage, and Power
■High Accuracy:
▲0.05% Gain Error (Maximum)
▲0.2μV Offset (Maximum)
■Configurable Averaging Options
■16 Programmable Addresses
■Operates from 2.7V to 5.5V Power Supply
■10-Pin MSOP Package
CSD203P 、 CSD203PAMSOP10 、 CSD201AMSOP10 、 CSD202AMSOP10 、 CSD203LAMSOP10 、 CSD203MAMSOP10 、 CSD203HAMSOP10 、 CSD204LAMSOP10 、 CSD204MAMSOP10 、 CSD204HAMSOP10 、 CSD204PAMSOP10 、 CSD205LAMSOP10 、 CSD205MAMSOP10 、 CSD205HAMSOP10 、 CSD205PAMSOP10 、 CSD206LAMSOP10 、 CSD206MAMSOP10 、 CSD206HAMSOP10 、 CSD206PAMSOP10 、 CSD20xX |
|
20-Bit, Ultra-Precise, I²C Output Current, Voltage, Temp, and Power Monitor 、 current shunt and power monitor |
|
[ Servers ][ Telecom equipment ][ Test equipment ][ Power management ][ Battery charges ][ Power supply control ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
MSOP;MSOP-10 |
|
English Chinese Chinese and English Japanese |
|
4 July, 2022 |
|
Rel 1.0.2 |
|
|
|
2.4 MB |
- +1 Like
- Add to Favorites
Recommend
- SMARTsemi Continues to Expand FLASH Offerings with Introduction of Industrial Grade SD/microSD Cards
- Selecting the Best Device for Converter Clocking Applications
- Industry‘s First Complete 5G Radio Synchronization Solution: Renesas Expanded Communication Timing Portfolio
- How GaN is Revolutionizing Motor Drive Applications
- Keysight FieldFox Handheld Analyzers Now Supports EMI Pre-Compliance Measurements
- RCD15W Series DC-DC Converter Meets EN50155 Railway Standard with 1”x1” Industrial Standard Package, Designed for Railway Application
- TAD30/TSD30 Series AC/DC Power Supply Has 30 Watts Output Power and Low Leakage Current under 100μA
- 20W High Isolation DC/DC Converter for Railway and Industrial Applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.