RabbitCore RCM4000:C-Programmable Analog Core Module with Ethernet User's Manual

PublishTime：2022-11-16

●The RCM4000 series of RabbitCore® modules is one of the nextgeneration of core modules that take advantage of new Rabbit®4000 features such as hardware DMA,clock speeds of up to60 MHz,I/O lines shared with up to five serial ports and four levels of alternate pin functions that include variable-phase PWM,auxiliary I/O,quadrature decoder,and input capture.Coupled with more than 500 new opcode instructions that help to reduce code size and improve processing speed,this equates to a core module that is fast,efficient,and the ideal solution fora wide range of embedded applications.The RCM4000 also features an integrated 10Base-T Ethernet port.
●Each production model has a Development Kit with the essentials that you need to design your own microprocessor-based system,and includes a complete Dynamic C software development system.The Development Kits also contains a Prototyping Board that will allow you to evaluate the specific RCM4000 module and to prototype circuits that interface to the module. You will alsobe able to write and test software for the RCM4000 modules.
●Throughout this manual,the term RCM4000 refers to the complete series of RCM4000 RabbitCore modules unless other production models are referred to specifically.
●The RCM4000 has a Rabbit 4000 microprocessor operating at up to 58.98 MHz,static RAM,flash memory,NAND flash mass-storage option, an 8-channel A/D converter,two clocks (main oscillator and timekeeping),and the circuitry necessary for reset and man-agement of battery backup of the Rabbit 4000's internal real-time clock and the static RAM.One 50-pin header brings out the Rabbit 4000 I/O bus lines,parallel ports,A/D converter channels, and serial ports.
●The RCM4000 receives its +3.3 V power from the customer-supplied motherboard on which it is mounted.The RCM4000 can interface with all kinds of CMOS-compatible digital devices through the motherboard.
●RCM4000 Features
■Small size:1.84" × 2.42" × 0.77" (47 mm × 61 mm × 20 mm)
■Microprocessor: Rabbit 4000 running at 58.98 MHz
■Up to 29 general-purpose I/O lines configurable with up to four alternate functions
■3.3 V I/O lines with low-power modes down to 2 kHz
■Up to five CMOS-compatible serial ports — four ports are configurable as a clocked serial ports (SPI),and one port is configurable as an SDLC/HDLC serial port.
■Combinations of up to eight single-ended or four differential 12-bit analog inputs (RCM4000 only)
■Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with parallel I/O lines),I/O read/write
■512KB or 1MB flash memory,512KB or 1 MB SRAM,with a fixed mass-storage flash-memory option that may be used with the standardized directory structure sup-ported by the Dynamic C FAT File System module
■Real-time clock
■Watchdog supervisor

Brand of Product：	DIGI
Part#：	RCM4000 series 、 RCM4000 、 RCM4010 、 RCM4050 More Part#
Product Category：	Development Kit 、 Analog Development Kit 、 C-Programmable Analog Core Module with Ethernet More
Application：	More
Data Type：	User's Guide More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2010/10/13
Version Number：
Data Encoding：	019–0157_J
Data Size：	808 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 130 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits