SFP+ Evaluation Board Application Note
■This document describes how to use the Lumentum SFP+ Evaluation Board PL-PP1-00-044-21 to characterize SFP and SFP+ products. Section 2 describes the equipment necessary to use the Evaluation Board for characterization. Section 3 contains laser safety warnings that should be considered when working with any Class 1 laser device. Section 4 describes a typical test set-up and power requirements for the Lumentum SFP+ evaluation board. Section 5 describes connectors and jumpers on the board and Section 6 shows the LED status indicators. Section 7 illustrates typical eye diagrams from the Transmitter (TX) and Receiver (RX). Section 8 explains ESD precautions that should be observed when working with any sensitive electro-optic device. Section 8 explains optical connector care and cleaning. The transceiver optical connector is a duplex LC connector. References to the standards applicable to SFP+ modules are provided in Section 10. A simplified schematic of the board appears in Section 11 in Figure 10 on page 15 and a Component placement drawing appears in Section 12 in Figure 11 on page 16. The dimensions of the board are supplied in Figure 12 on page 17.
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2015/8/14 |
|
|
|
|
|
|
|
|
2.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
