KDE DIRECT 2315XF BRUSHLESS MOTOR SERIES INSTALLATION INSTRUCTIONS: DJI™ PHANTOM® 2/3 SERIES
●DJI™ PHANTOM® 2/3 SERIES
■Installation of the KDE2315XF Brushless Motor Series begins with removal of the upper-case of the Phantom® body. For the DJI Phantom® 2, removal is simple via the use of standard 1.5 mm and 2.0 mm hex wrenches. For the Phantom® 3, removal requires TORX wrenches available at many hardware stores or online, in the T6 and T8 size specification. Additional plastic locking-tabs are found around the case, so releasing these will allow for removal of the upper case (and disconnection of the compass/GPS sensor).
■Remove the original motors (use the 2.0 mm hex wrench to unscrew the stock M3 socket-head cap screws),exposing the motor mount. For the Phantom® 3 series,four plastic tabs are molded into the mount and are not-required. Simply remove or bend the tabs flush to the motor mount with thumb-pressure, providing proper clearance for the KDE2315XF motor case.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2015/9/23 |
|
|
|
|
|
|
|
|
936 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
