SPIROL® PIN DRIVING CHUCKS
■This light duty, stainless steel pin driving chuck is designed for use with SPIROL’s Model PM Manual Pin Inserter. It may also be used in a drill press or arbor press with an adapter.
■ An internal compression spring acts on the outer flanges of the jaws to provide retention force and hold the pin securely prior to and during installation. This feature eliminates the difficulty with handling small diameter or short pins. The tool is also designed to provide the operator with good visibility for aligning the pin with the hole in the work piece facilitating trouble-free installation.
■To use this tool, install the Model SPD into the press adapter. Insert the pin into the SPD jaws, and align the pin with the hole in the assembly. Pull down the press lever. Downward movement of the press starts insertion of the pin into the hole. When the jaws of the Model SPD contact the assembly surface, an internal punch continues downward to complete the insertion of the pin to the desired depth - below flush, flush or above flush. When used in conjunction with SPIROL's Model PM Pin Inserter, a stop can be set for specific and repeatable installation depths.
|
Model PM 、 PM 、 300 Series 、 300 、 MODELS CXA 、 MODELS CXD 、 CXD 、 CXA 、 MODELS CXE 、 CXE 、 Model PMH 、 PMH 、 Model PMX 、 PMX 、 SPD |
|
|
Manual Pin Inserters 、 Pin Driving Chuck 、 arbor presses 、 drill presses 、 air guns |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
07/16 |
|
|
|
|
|
|
|
|
1.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
