ATL 800 AUTOMATIC TRANSFER SWITCH CONTROLLER Installation manual
●ATL 800 has two power supplies: 100-240 VAC or 12-24-48 VDC. Priority is given to the AC power if both are present at the same time.
●The equipment is normally set to the OFF mode when it is switched on. Modify parameter P01.03 in the M01 Utility menu if the operating mode selected before switch-off must be maintained.
●If may be powered at 12, 24 or at 48VDC but the battery voltage must be set correctly in the M04 battery menu otherwise a battery voltage alarm will be generated.
●All LEDs blink during the energising procedure to check operation.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020/9/3 |
|
|
|
I434 GB I F D E 09 20;31100217 |
|
247 KB |
- +1 Like
- Add to Favorites
Recommend
- Introducing Silicon Labs’ New Z-Wave 800 Dev Kit for Easy Smart Home IoT Application Development
- Keysight Collaborates with Credo to Deliver 800 Gigabit Ethernet Readiness and Interoperability Testing
- MASWELL High Gain GSM/WiFi Antenna, Coverage Frequency Range 800~2500MHz, Gain 11dBi
- Keysight Collaborates with Nokia to Demonstrate the First 800 Gigabit Ethernet Readiness and Interoperability Public Test
- ITT Cannon showcased in DSEI 2023 with leading portfolio of ultrareliable connectors for the next generation of defense applications
- Crocus Technology’s new line of contactless current sensors with a signal-to-noise ratio as high as 77 dB
- Coherent Debuts 800Gbps QSFP Form Factor Transceiver Module for IPOVER-DWDM Applications
- Leonardo, A Customizable Display Based on Android for Off-highway Applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.