Anaren Integrated Radio A1101R09x User's Manual
●The A1101R09A and A1101R09C have received regulatory approvals for modular devices in the United States (FCC) and Canada under Industry Canada (IC) Radio Standards Specification (RSS) RSS-210 and RSS-Gen.The modular approval allows the OEM or end user to place either an A1101R09A or an A1101R09C with an approved antenna inside a finished product without having to perform costly regulatory testing for an intentional radiator.Section 2.3 has information on the requirements for the end user/integrator must fulfill to use the modules without intentional radiator regulatory testing.
●The A1101R09A and A1101R09C are based on the CC1101 transceiver IC from Texas Instruments.All control lines for the transceiver are provided at module level for full control of its operation.Please see the CC1101 data sheet for how to control the modules.
●The A1101R09A measure 9x16x2.5mm and A1101R09C measures 9x12x2.5mm.The modules are footprint compatible with each other.
●Features:
■Frequency range:902-928 MHz
■Ultra small package size
■A1101R09C:9mm x 12mm x 2.5mm
■A1101R09A:9mm x 16mm x 2.5mm
■Impedance controlled multi-layer PCB
■Shielded Package
■1.8 to 3.6V operation
■SPI Interface
■RoHS Compliant
■LGA Footprint
■Low Power Consumption
■Regulatory approvals for FCC
■Digital RSSI output
■Programmable channel filter bandwidth
■Programmable output power up to +10 dBm
■High sensitivity (–104 dBm at 1.2 kBaud,1% packet error rate)
■Low current consumption (14.4 mA in RX,1.2kBaud,input well above sensitivity limit)
■Fast startup time:240us from SLEEP to Rx or Tx mode
■Separate 64 byte Rx and Tx FIFOs
■Data Rate:1.2 –500 Kbit/Sec
■Programmable data rate from 1.2 to 500 kBaud
■Sleep state:0.2μA
■Idle State:1.7mA
●Benefits Summary:
■Operating temperature -40 to +85C
■100% RF Tested in production
■Common footprint for all family members
■No RF engineering experience necessary
■Only requires a 2 layer PCB implementation
■Excellent receiver selectivity and blocking Performance
■Suited for systems compliant with FCC CFR47 Part 15.247a2 and 15.249 (US) and Canada under Industry Canada (IC) Radio Standards Specification (RSS) RSS-210 and RSS-Gen.
■No regulatory ''Intentional radiator'' testing required to integrate module into end product.Simple certification labeling replaces testing.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
05/08/12 |
|
|
|
|
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Why Do Molding Chokes Need Separate Bias Current Testing?
- Bare Die SiC from ROHM Chosen by Apex Microtechnology for Newest Line of Power Modules, Saving Space and Increasing Performance
- SA Series Transient Voltage Suppressor Diode with Excellent Clamping Capability, High Surge Capability, Low Zener Impedance and Fast Response Time
- METZ CONNECT Releases BMT-AOP2 Analog BACnet MS/TP Output Module for Building Automation
- Silicon Labs Supports New Bluetooth® Mesh Feature Enhancements & Networked Lighting Control Standardized Profiles
- IS6630A/C/D with Three-way Output Enables DDR Power Supply Integration, Saving the Space on the PCB Board And the Required Devices
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.