Model A58HB/A58SB Installation Guide
■Slide the encoder over the motor shaft. If needed, clean the motor shaft of any burrs using a fine crocus cloth.
■DO NOT USE UNDUE FORCE.
■Position the encoder so that the flex mount arms just touch the mounting surface. Install screw(s) through the holes in the flex mount and tighten onto the motor securely. (Typical torque range of 115 to 160 oz-in). For additional security, add a drop of Loctite or similar threadlocker to the threads of the screws.
●Step 2
■Using a 2.5 mm hex wrench, tighten the setscrew in the encoder's clamping collar. (Typical torque range of 50 to 80 oz-in). For additional security, add a drop of Loctite or similar thread locker to the threads of the setscrew. Do not allow Loctite to run into the bore or onto the encoder bearings.
●Step 3 (2 pt. flex mount option on Model A58HB only)
■For encoders with the 2 pt. flex mount option, the home position can be adjusted by loosening the mounting screws and rotating the encoder to the desired position, then retightening the screws.
■ALIGNMENT NOTE: When turning the motor shaft by hand, the rocking movement of the encoder should be minimal. If not, loosen the encoder clamping collar setscrew and rotate the encoder bore relative to the motor shaft to reposition the encoder until this movement is minimized.
■When tightening the screw(s) or setscrews, avoid holding the motor shaft with anything that may scar or burr the shaft
|
Model A58HB 、 A58HB 、 A58SB |
|
|
|
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
03/30/2021 |
|
|
REV 03/30/2021 |
|
|
TB-539 |
|
|
806 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
