NEMA motor Mod-Express® Menden build center CATALOG
2022-10-31
■ General information
● Catalog notes:
▲ Efficiencies
◆ Efficiencies of all 60 Hz motor designs are listed as NEMA nominal at full load (Except the motors designed to meet the Small Motor Rule average efficiencies as specified by the DOE).
▲ Full load amps (FLA)
◆ For low voltage amps, double high voltage amps shown, excluding medium voltage amps for 2300/4000 voltage.
▲ Motor bearings
◆ Motors with ball bearings are suitable for coupled loads. If a load is belted, a roller bearing may be required, contact your local ABB Sales Office if you have questions or need assistance.
▲ Service factor
◆ NEMA T-frames in TEFC construction have a service factor of 1.15 or greater except where noted. All NEMA U- frame TEFC motors (except explosion-proof) have NEMA open service factors. Fractional horsepower TEFC motors have NEMA open service factors. All Inverter Duty® and Vector Duty® AC motors have 1.0 Service Factors. All DC motors have 1.0 service factors.
▲ Mounting holes
◆ Most steel band and cast iron foot-mounted motors have dual mounting holes (143T-145T, 182T-184T, etc.)
▲ F1/F2
◆ All Cast iron motors are built with symmetrical frames which may be converted from F1 to F2 by switching endplates and rotor from end-to-end except for L182T, L184T, L213T, L215T and L449T. TEFC 5000 and 5800 frame motors are field convertible from F1 to F2 via swingarm. For ODP 5000 and 5800 Frames, please check with factory for F-1/F-2 conversion. Frames with the “L” prefix have standard NEMA base and BA dimensions. Also applies to TC versions of these frame sizes.
▲ Modified motors
◆ Using stock motors, ABB Menden build center can modify motors to fit a variety of applications in only 2 to 5 working days for most modifications. Please see the Mod Express section in this catalog for more information.
▲ Custom motors
◆ For information on motor designs and capabilities not found in this catalog, please contact your local ABB sales office.
● Catalog notes:
▲ Efficiencies
◆ Efficiencies of all 60 Hz motor designs are listed as NEMA nominal at full load (Except the motors designed to meet the Small Motor Rule average efficiencies as specified by the DOE).
▲ Full load amps (FLA)
◆ For low voltage amps, double high voltage amps shown, excluding medium voltage amps for 2300/4000 voltage.
▲ Motor bearings
◆ Motors with ball bearings are suitable for coupled loads. If a load is belted, a roller bearing may be required, contact your local ABB Sales Office if you have questions or need assistance.
▲ Service factor
◆ NEMA T-frames in TEFC construction have a service factor of 1.15 or greater except where noted. All NEMA U- frame TEFC motors (except explosion-proof) have NEMA open service factors. Fractional horsepower TEFC motors have NEMA open service factors. All Inverter Duty® and Vector Duty® AC motors have 1.0 Service Factors. All DC motors have 1.0 service factors.
▲ Mounting holes
◆ Most steel band and cast iron foot-mounted motors have dual mounting holes (143T-145T, 182T-184T, etc.)
▲ F1/F2
◆ All Cast iron motors are built with symmetrical frames which may be converted from F1 to F2 by switching endplates and rotor from end-to-end except for L182T, L184T, L213T, L215T and L449T. TEFC 5000 and 5800 frame motors are field convertible from F1 to F2 via swingarm. For ODP 5000 and 5800 Frames, please check with factory for F-1/F-2 conversion. Frames with the “L” prefix have standard NEMA base and BA dimensions. Also applies to TC versions of these frame sizes.
▲ Modified motors
◆ Using stock motors, ABB Menden build center can modify motors to fit a variety of applications in only 2 to 5 working days for most modifications. Please see the Mod Express section in this catalog for more information.
▲ Custom motors
◆ For information on motor designs and capabilities not found in this catalog, please contact your local ABB sales office.
- +1 Like
- Add to Favorites
Recommend
More>
- Learn More about LED Cinema Display
- Littelfuse Launches NEMA-style Surge Protective Device SPDN Series in Small Package,Optimizing Space and Delivers Cost Efficiencies
- Unimotion STDL-PN Profinet Drive Providing Modern and Powerful Motion Control Solutions
- How to Choose Battery for A Cinewhoop?
- How to Choose a Cinelifter Battery?
- Kinglight Debuted at SLS Expo 2024 with Brand New LEDs for Displays
- Amphenol-GIS Busbars for SPD Type 2 to Meet a Fast and Pre-assembled Wiring
- The Newest Version of Kinco HMI Software Kinco DTools V3.5.3 Which was Added Many IoT Functions
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.