CONDOR/MILAN/FALCON:How to use the push buttons?
●ACTION: PUSH AND HOLD the right button until the red LED flashes
●RESULT: The red and green LED are flashing subsequently.
■ADJUSTMENT:
●ACTION: Pushing on the right button = scrolling through the different PARAMETERS.
●RESULT: The number of red flashes indicates the selected parameter.
●ACTION: Pushing on the left button = increasing the VALUE of the displayed parameter by ■ unit
●RESULT: The number of green flashes indicates the value of the current parameter (no LED, value = 0).
■STOP:
●ACTION: PUSH AND HOLD the right button until the LEDs stop flashing.
●RESULT: If the red LED lights up, you are standing in the detection field and creating a detection.
■FACTORY VALUES:
●ACTION:PUSH AND HOLD both buttons for a few seconds.Exit and enter the adjustment session to verify.
■SETUP IR-FIELD:
●ACTION:BRIEFLY PUSH the left button and step out of the detection field.
●RESULT: Both LEDs flash and switch OFF.
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
02.11 |
|
|
V1-02.11 |
|
|
AN025 |
|
|
409 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
