LZR®:Cleaning emission and reception windows
■CLEANING PROCESS:
●The following material is necessary to clean polycarbonate:
▲Water
▲non-abrasive/non-contaminating cloth
▲mild, non-abrasive cleaner
●Begin by determining what kind of cleaning solution is needed by observing the amount of pollution.
●If there is just a small amount of dust, then water is sufficient. If there is significant pollution, you may wish to mix in a mild, non-abrasive detergent with the water.
●If the surface is just lightly covered with dirt, use a soft cloth moistened with water to gently wipe the surface. Turn the cloth inside out to keep a clean side on the windows. It is important to avoid rubbing the dirt on the surface because it can cause even more scratching.
●For more significant amounts of dirt, use a very wet cloth. Gently swab the cloth on the surface and allow the water to lift the dirt and “rinse” it away.
●Once most of the dirt has been removed with the water, use a second cloth to clean the windows using the same technique described in step 3.
■TIPS:
●Avoid any cleaning products with ammonia as it will eat through the surface and leave it looking cloudy.
●Other cleaners that should be avoided include ketenes, halogens, window cleaners, kitchen scouring compounds, aromatics and solvents such as thinners, acetone, gasoline, benzene and tetrachloride. Any cleaner that is abrasive or strong enough to eat through the surface should be avoided.
●If required, polycarbonate can be cleaned with a solution of neutral detergent and water. Always clean with a soft cloth, applying very little pressure.
■WARNING:
●The emission and reception windows are critical components in an optical base product like the laser scanner. They have an immediate impact on the product performances.
●If for any reason they are strongly scratched, spoilt or damaged in a permanent way, the product should be refurbished or replaced.
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
03.11 |
|
|
V1-03.11 |
|
|
42.8839 |
|
|
41 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
